Skip to content Skip to navigation menu

Your Selected Vehicle

CATEGORIES

Brands

Part Location

Item Type

Price

Parts for your 2006 Nissan X-trail-Pedal pads

Sort by
Showing 1 - 6 of 6 products

2006 Nissan X‑Trail pedal pads

Pedal pads are absolutely relevant on the 2006 Nissan X‑Trail (T30). The factory setup uses replaceable rubber pads on the brake pedal, and on the clutch pedal in manual models. The accelerator is a moulded pedal without a separate rubber pad. This fitment is documented in Nissan’s X‑TRAIL T30 Service Manual (Brake and Clutch sections) and the Nissan FAST Electronic Parts Catalogue for the T30, which lists PAD‑PEDAL items for brake and clutch as service parts. So, if it’s a 2006 X‑Trail, it does have pedal pads where they matter most for safety and grip.

On this X‑Trail, pedal pads do a simple but vital job: they give the driver secure, non‑slip contact underfoot in the wet, on dusty job sites, and during everyday stop‑start traffic. The pads’ ribbed rubber surface boosts traction, cushions vibration, and helps keep footwear from skating across the pedal face when boots are damp or soles are worn smooth. That extra grip translates into more consistent braking pressure and finer clutch control, which is exactly what you want on city runs or a weekend mission down a gravel track.

They’re consumables, though. Rubber hardens, goes shiny, or perishes over time, especially with plenty of around‑town kilometres. As part of routine servicing, it’s smart to check the pedal pads annually (or every 20,000 km): if the ribs have flattened, the pad’s cracked, or it feels slick underfoot, it’s time to swap them out. Nissan’s parts listings show the brake and clutch pads are sold separately, so you can replace what’s worn without drama.

  • Shiny or smooth pedal surface
  • Cracks, splits, or missing chunks
  • Pad feels loose or can be rotated by hand
  • Contamination by oil or silicone dressing that won’t clean off

Replacement is a quick driveway job. Pop the old pad off, clean the bare pedal with mild detergent, and work the new pad on starting from one edge. A touch of warm soapy water helps it seat, avoid silicone sprays as they can reduce grip. Make sure the pad’s fully home on all edges and the ribs face the right way up. After fitting, press the pedal a few times to confirm nothing shifts. Keep the footwell tidy and skip glossy interior dressings on or near the pedals—they’re a hazard when they migrate onto the rubber.

Do all 2006 Nissan X‑Trails have pedal pads?

Yes for the brake pedal on every 2006 X‑Trail. Manual models also have a clutch pedal pad. The accelerator is a one‑piece moulded pedal, so there’s no separate rubber pad for that one.

How often should pedal pads be replaced on a 2006 X‑Trail?

There’s no fixed interval, replace them when they’re shiny, hard, cracked, loose, or slippery. Checking them at each service (about every 10,000–20,000 km) is a good habit, especially if the vehicle sees wet boots or dusty conditions.

Can they be changed at home, or does it need a workshop?

They’re an easy DIY job that usually takes a few minutes per pedal. If the pad won’t seat properly, or the bare pedal metal looks bent or damaged, a workshop should inspect it.

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Do all 2006 Nissan X-Trails have pedal pads?", "acceptedAnswer": { "@type": "Answer", "text": "Yes for the brake pedal on every 2006 X-Trail. Manual models also have a clutch pedal pad. The accelerator is a one-piece moulded pedal, so there’s no separate rubber pad for that one." } }, { "@type": "Question", "name": "How often should pedal pads be replaced on a 2006 X-Trail?", "acceptedAnswer": { "@type": "Answer", "text": "There’s no fixed interval, replace them when they’re shiny, hard, cracked, loose, or slippery. Checking them at each service (about every 10,000–20,000 km) is a good habit, especially if the vehicle sees wet boots or dusty conditions." } }, { "@type": "Question", "name": "Can they be changed at home, or does it need a workshop?", "acceptedAnswer": { "@type": "Answer", "text": "They’re an easy DIY job that usually takes a few minutes per pedal. If the pad won’t seat properly, or the bare pedal metal looks bent or damaged, a workshop should inspect it." } } ]}