Your Selected Vehicle
Parts for your 2006 Nissan Serena-Pedal pads
Explore 4WD & Adventure
2006 Nissan Serena pedal pads — purpose, fitment and easy service advice
Technical sources confirm pedal pads are fitted to the 2006 Nissan Serena (C25). The Nissan Electronic Parts Catalogue (C25 series, MY2005–2010) lists a rubber brake pedal pad for all variants, with an additional clutch pedal pad on manual-transmission models. The Nissan Serena C25 service manual brake and clutch sections also illustrate the removable rubber pad on the pedal faces. The accelerator on this model uses an integrated treaded pedal, not a slip-on pad. So yes — pedal pads are relevant on a 2006 Serena.
On this people mover, the pedal pads do a simple but critical job: they add grippy, hard-wearing rubber to the metal pedal so boots don’t slip, especially in wet Kiwi or Aussie conditions. They dampen a bit of vibration, protect the pedal face from wear, and help the vehicle meet safety expectations for pedal traction. For manuals, the clutch pad gives consistent bite when feathering the pedal in traffic or on hills, for autos, the larger brake pad gives a broad, stable contact area for confident stops.
As part of regular servicing, owners should inspect the pads every 10,000–15,000 kilometres (or each service). Look for ribs worn smooth, surface glazing, cracks, hardening, or the pad lifting at the edges. Any sign of slipping when wet, or a shiny, bald patch, means it’s time to replace. A missing or loose pad can fail a WOF (NZ) or roadworthy (AU), so it’s not just comfort — it’s compliance.
- Cleaning: Wipe with mild detergent and water, avoid silicone dressings that make rubber slick.
- Fitment: Match by VIN or transmission type, auto = brake pad only, manual = brake and clutch. The accelerator is not a slip-on pad.
- Quality: Choose OEM or reputable aftermarket rubber, skip metal clip-on “fashion” covers that can reduce grip.
- Peel off the old pad from the metal pedal face.
- Clean the pedal plate, ensure it’s dry and free of grit.
- Hook the new pad’s lip over the top edge, then work it around until fully seated.
- Press all edges to check it’s locked on, then test pedal feel before driving.
Replacement is a quick DIY job — usually a few minutes per pedal with no tools. If the pad keeps slipping off, the wrong part may have been supplied, or the pedal plate could be bent and need attention.
Popular questions about 2006 Nissan Serena pedal pads
Do all 2006 Serena models have pedal pads?
Yes. Every 2006 Serena has a rubber brake pedal pad. Manual-transmission versions also have a clutch pedal pad. The accelerator uses an integrated treaded pedal rather than a separate slip-on pad.
How can owners tell the pedal pads need replacing?
If the rubber is smooth or shiny, cracked, hard, or lifting at the edges — or if shoes slip when damp — it’s due. Check at each service or every 10,000–15,000 km. A missing or loose pad can affect WOF/roadworthy.
Are universal pedal covers OK to use?
Best to avoid metal clip-on covers or “universal” pieces that don’t lock to the Serena’s pedal plate. Use a correct-fit rubber pad matched to the vehicle and transmission to maintain grip and compliance.
