Your Selected Vehicle
Parts for your 2006 Nissan Pulsar-Headlight bulbs
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Narva 12/24 Aeromax Amber LED Mini Light Bar Amber Lens Magnetic Mount - 85013A
Narva 12/24 Aeromax Amber LED Mini Light Bar Clear Lens Magnetic Mount - 85013AC
Narva 10-33 Volt 'Aerotech' Short LED Strobe Rotator - Blue - Flange Base - 85606B
Narva 12/24V Aeromax LED Mini Light Bar Amber Lens/Amber Single Bolt Mount - 85011A
Narva 1.68m(66in) Light bar - Amber - With Clear lense With Take-Down and Alley Lights - 85057AC
Narva 1.07m(42in) Light bar - Amber - With Clear lense - With Take-Down and Alley Lights - 85051AC
Narva Mine Bar LED Amber Beacon STIR Worklamp W/Handle Broadband Alarm 1.2m - 85075B
Narva Mine Bar LED Low Profile Amber Beacon STIR Reverse Alarm 1.2m - 85071A
NARVA 12/24V AeroTech Low Profile Light Box With Multi Function Cradle - Amber - 85018A
Narva 12/24V Aeromax LED Mini Light Bar Amber/Green Single Bolt Mount - 85011AG
Narva 12/24V Aeromax LED Mini Light Bar Amber w/ Clear Lens Single Bolt Mount - 85011AC
Narva Mine Bar Amber LED Beacon STIR Worklamp Broadband Alarm 1.2m - 85084B
Narva Mine Bar Amber LED Beacon STIR LED Worklamp Broadband Alarm1.2m - 85073B
Narva Mine Bar LED Amber Beacon STIR Worklamp W/Handle Reverse Alarm 1.2m - 85075A
Narva Mine Bar LED Low Profile Amber Beacon STIR Broadband Alarm 1.2m - 85071B
Narva Mine Bar Amber LED Beacon STIR LED Worklamp Reverse Alarm 1.2m - 85073A
2006 Nissan Pulsar Headlight Bulbs
Based on Nissan service information for the N16 series and major AU/NZ bulb catalogues commonly used by workshops, the 2006 Nissan Pulsar is fitted with conventional halogen headlight bulbs. Most trims use an H4 dual‑filament 12V 60/55W bulb for combined low and high beam. Some market variants and imports may use separate bulbs (commonly H7 low beam and H1 high beam), so checking the owner’s manual, the existing bulb, or a parts lookup by VIN is the smart move. In short, headlight bulbs are definitely relevant on this vehicle.
The headlight bulbs do the heavy lifting for safe night driving—throwing a clear, legal beam so the driver can see the road and be seen by others. On a 2006 Pulsar, healthy bulbs also help it pass Warrant of Fitness/roadworthy checks and meet local lighting rules.
It’s normal for halogen bulbs to fade before they finally blow. Many owners notice a yellowed, dim beam after a couple of years. Replacing bulbs in pairs keeps light output and colour even from side to side. Sticking with ADR/NZTA‑compliant wattage is essential, and upgrading within the halogen family (for example, premium +vision styles) can sharpen the beam without legal grief.
DIY replacement on the Pulsar is straightforward for most trims:
- Open the bonnet and access the lamp from behind the headlight.
- Unplug the connector, peel back the rubber dust boot, and release the spring clip.
- Swap in the correct bulb type, avoiding touching the glass with bare fingers (use gloves or a tissue).
- Refit the clip, boot, and connector, then test both beams.
During servicing, it’s worth asking for a quick lighting check: aim/adjustment, lens clarity, moisture inside the housing, and the condition of connectors and the engine‑bay headlight fuses/relays. If the lenses are hazy, a professional polish can restore output noticeably. Avoid LED or HID retrofits in the factory halogen reflectors—besides likely failing WOF/roadworthy, they tend to create glare and poor beam focus.
Typical related bulbs on the Pulsar include T10 wedge parkers and, where fitted, H3 fog light bulbs. Because trims vary, a fast visual check or VIN‑based lookup prevents mismatches and saves repeat trips to the parts counter.
Popular questions about 2006 Nissan Pulsar headlight bulbs
What headlight bulb type fits a 2006 Nissan Pulsar?
Most Australian and New Zealand N16 Pulsars use an H4 12V 60/55W bulb for both beams. Some imports and specific trims may run H7 (low) and H1 (high). The best practice is to confirm by checking the existing bulb or the owner’s manual.
Can LED bulbs be used in the factory headlights?
Not recommended. Retrofitting LED or HID bulbs into halogen reflector housings is usually non‑compliant in AU/NZ and can cause glare and poor focus. For a brighter, legal result, choose a quality halogen upgrade that remains within approved specs.
How often should headlight bulbs be replaced?
Halogen bulbs slowly dim with age. Many owners replace them every 2–3 years or whenever one fails. Swapping both sides at once keeps the beam even and avoids a mismatched look at night.