Parts for your 2006 Nissan Navara-Pedal pads

2006 Nissan Navara pedal pads — what they do and when to replace them

Pedal pads are absolutely fitted to the 2006 Nissan Navara (D40). Technical references that confirm this include the Nissan Navara D40 Service Manual — which calls out inspection of brake and clutch pedal rubber pads in the Brake (BR) and Clutch (CL) sections — and the Nissan FAST Electronic Parts Catalogue (EPC) for D40 models, which lists dedicated rubber “Pad–Pedal” items for the brake pedal (all transmissions) and the clutch pedal (manuals). On these utes, the accelerator uses an integrated plastic tread as part of the pedal assembly rather than a separate rubber pad.

On a 2006 Navara, the pedal pads are the grippy rubber covers fitted over the metal brake and (if manual) clutch pedals. Their whole job is to stop boots slipping, especially when it’s wet or muddy, and to give a consistent feel underfoot. They also protect the pedal arm from wear and reduce noise and vibration. Because they’re safety-critical, a worn pad can be the difference between a confident stop and a dodgy, slippery moment — not what anyone wants in a workhorse ute.

As part of routine servicing, it’s smart to check the pads every service interval or roughly every 10,000–15,000 kilometres. Replace them straight away if they’re smooth and shiny, have cracks, are thinning through the centre, or the edges have started curling. For manuals, give the clutch pad the same scrutiny as the brake. The accelerator generally isn’t a serviceable rubber pad on the D40, if its surface is damaged, the pedal assembly is assessed rather than “re-padded.”

Replacement is a quick, tool-light job: the old rubber pulls off, and the new pad presses on over the pedal plate. Choose a genuine-spec pad or a quality aftermarket equivalent that matches the pedal’s shape, part numbers can vary by VIN, so checking against the EPC or a dealer by VIN is best. Keep the pads clean with mild soap and water, and avoid silicone or glossy dressings that make them slippery. Also confirm floor mats are clipped in properly and not riding up behind the pedals.

• Tell-tales for replacement: slick surface, cracking, rubber crumbs, boot slipping when wet, or visible metal on the pedal face.
• Pro tip: fit pads when the cabin is warm so the rubber is more flexible and easier to seat on the pedal plate.

Do 2006 Nissan Navara utes have pedal pads, and which ones?

Yes. All 2006 Navara D40s have a rubber brake pedal pad. Manual models also have a rubber clutch pedal pad. The accelerator on these models typically uses an integrated plastic tread as part of the pedal assembly rather than a separate rubber pad.

How can someone tell a pedal pad needs replacing?

If the pad is smooth and shiny, cracked, thinning through the centre, or the boot slips (especially when wet), it’s due. Any exposed metal on the pedal face or rubber debris on the floor is another clear sign. Replace immediately to maintain safe, sure-footed control.

Are automatic and manual pedal pads the same on a 2006 Navara?

The brake pedal pad is common to both, but manuals add a separate clutch pedal pad. Shapes can vary by market and VIN, so it’s best to confirm compatibility using the vehicle’s VIN with a parts catalogue or dealer before ordering.