Parts for your 2006 Honda Odyssey-Pedal pads

2006 Honda Odyssey Pedal Pads

Pedal pads are absolutely relevant to the 2006 Honda Odyssey. Technical sources such as the Honda Odyssey (2005–2010) Factory Service Manual and the Honda Electronic Parts Catalogue specify a replaceable rubber pad for the service brake pedal, and a separate rubber pad for the foot-operated parking brake pedal. The accelerator on this model is an integrated pedal assembly and does not use a separate, replaceable rubber pad. So, when talking “pedal pads” on a 2006 Odyssey, it means the brake pedal pad and the parking brake pedal pad.

The purpose of these pads is simple but important: they provide grippy, vibration-damping contact so the driver’s foot doesn’t slip—especially when shoes are wet. A good pedal pad maintains consistent pedal feel and helps meet roadworthy/WOF expectations. Over time, rubber hardens, wears smooth, or tears, and that can reduce traction when it matters most.

As part of regular servicing, it’s smart to inspect the Odyssey’s pedal pads at least every service or 10,000–15,000 kilometres. Look and feel for wear and tear. If the pad is shiny, cracked, hardened, or the ribs are worn flat, it’s due for replacement. Any sign of slipping underfoot is a red flag.

• Common replacement cues: smooth/glazed surface, splits or missing chunks, pad slipping off the metal pedal, or contamination by oil/grease.
• Cleaning tip: wipe with mild soap and water only—avoid silicone dressings that make the surface slippery.

Replacement is a quick, low-cost job. The old pad is pried off the pedal plate and the new pad is worked on starting from one edge, ensuring the rubber lip fully seats around the pedal perimeter. No adhesive is required if the correct part is used. For the parking brake pedal, follow the same approach and confirm the pad doesn’t foul the release mechanism.

When servicing, a technician will also check that no brake fluid or oil has contacted the pads