Your Selected Vehicle
Parts for your 2006 Honda Civic-Tail lights
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Diffused Pattern 4 LED Work Light - LEDWORK-C4-DIFFUSE
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2006 Honda Civic
When it comes to maintaining your 2006 Honda Civic, keeping an eye on your tail lights should be a part of your regular routine. Not only do these lights ensure your vehicle is visible to those behind you, but they also signal your intentions to brake or turn. If you're noticing dim lights, a cracked lens, or any other issue, it might be time to consider replacement or maintenance.
- Assess the Condition of Your Tail Lights
Start by giving your tail lights a quick inspection. Check for cracks, cloudiness, or moisture build-up inside the lens. These can all be signs that your tail lights need some attention. Don't forget to check if the bulbs are still shining brightly and if the lights illuminate properly when you activate your brakes or indicators. If they're flickering or are fainter than usual, replacement is most likely necessary.
- Replacing a Tail Light Bulb
Replacing a bulb in your 2006 Honda Civic is straightforward, and you can usually do it yourself with minimal tools. Here's a general guide to help you out:
- First, ensure your car is turned off and remove the keys from the ignition for safety.
- Access the rear of the tail light assembly by opening the boot of your vehicle. You might need to peel back some carpeting or remove a panel to get to the screws holding the tail light in place.
- Unscrew the assembly carefully and pull it out. It's usually held by plastic clips, so a gentle hand is necessary to avoid damage.
- Once the assembly is out, you'll see the bulb holder. Twist it counter-clockwise, and it should come out. Swap out the old bulb with a new one, making sure it's secured firmly before returning the holder to the assembly.
- Test your new bulb before reassembling everything to ensure it's working correctly. Then, secure the assembly back in place, aligning the clips and screwing it tightly.
- Regular Maintenance Checks
While replacing a faulty bulb is essential, regular checks will help you avoid finding yourself with a malfunctioning tail light unexpectedly. Make it a habit to test your lights regularly as part of your vehicle maintenance routine. A few checks every month could save you from potential fines and increase your safety on the road.
If you're unsure about your tail lights or apprehensive about doing maintenance yourself, consult a professional mechanic. They'll ensure that everything is in order and give you peace of mind while driving your 2006 Honda Civic.
Paying attention to your tail lights and promptly addressing any issues is a small step that plays a big role in your overall vehicle safety. It's worth taking the time to ensure they're in excellent condition.