Your Selected Vehicle
Parts for your 2006 Honda Civic-Tail lights
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2006 Honda Civic
When it comes to maintaining your 2006 Honda Civic, keeping an eye on your tail lights should be a part of your regular routine. Not only do these lights ensure your vehicle is visible to those behind you, but they also signal your intentions to brake or turn. If you're noticing dim lights, a cracked lens, or any other issue, it might be time to consider replacement or maintenance.
- Assess the Condition of Your Tail Lights
Start by giving your tail lights a quick inspection. Check for cracks, cloudiness, or moisture build-up inside the lens. These can all be signs that your tail lights need some attention. Don't forget to check if the bulbs are still shining brightly and if the lights illuminate properly when you activate your brakes or indicators. If they're flickering or are fainter than usual, replacement is most likely necessary.
- Replacing a Tail Light Bulb
Replacing a bulb in your 2006 Honda Civic is straightforward, and you can usually do it yourself with minimal tools. Here's a general guide to help you out:
- First, ensure your car is turned off and remove the keys from the ignition for safety.
- Access the rear of the tail light assembly by opening the boot of your vehicle. You might need to peel back some carpeting or remove a panel to get to the screws holding the tail light in place.
- Unscrew the assembly carefully and pull it out. It's usually held by plastic clips, so a gentle hand is necessary to avoid damage.
- Once the assembly is out, you'll see the bulb holder. Twist it counter-clockwise, and it should come out. Swap out the old bulb with a new one, making sure it's secured firmly before returning the holder to the assembly.
- Test your new bulb before reassembling everything to ensure it's working correctly. Then, secure the assembly back in place, aligning the clips and screwing it tightly.
- Regular Maintenance Checks
While replacing a faulty bulb is essential, regular checks will help you avoid finding yourself with a malfunctioning tail light unexpectedly. Make it a habit to test your lights regularly as part of your vehicle maintenance routine. A few checks every month could save you from potential fines and increase your safety on the road.
If you're unsure about your tail lights or apprehensive about doing maintenance yourself, consult a professional mechanic. They'll ensure that everything is in order and give you peace of mind while driving your 2006 Honda Civic.
Paying attention to your tail lights and promptly addressing any issues is a small step that plays a big role in your overall vehicle safety. It's worth taking the time to ensure they're in excellent condition.