Your Selected Vehicle
Parts for your 2005 Suzuki Swift-Headlight bulbs
Narva H4 Headlight Bulb P43T 38 Arctic Blue 12V 60/55W 2 Pce - 48677BL2
Repco H4 Headlight Bulb Performance Long Life 12V 60/55W P43T38 - RH4LLBL-2
Narva H4 Headlight Bulb 12V 60/55W Sapphire Plus 50 2 Pce - 48522BL2
Narva H4 Headlight Bulb P43T Plus 100 12V 60/55W 2 Pce - 48872BL2
OEX Ignition Switch Acc - Off - Ign - Start (Contacts Rated 30A @ 12V) - ACX3556BL
Explore 4WD & Adventure
Narva H4 Headlight Bulb Platinum Plus 12V 60/55W 2 Pce - 48542BL2
Narva H4 Headlight Bulb P43T 38 Intense Blue 12V 60/55W 2 Pce - 48472BL2
Narva H4 Headlight Bulb P43T 38 Blue Plus 110 12V 60/55W 2 Pce - 48532BL2
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 30m Roll (NZ Ref.153) - ACX0808
OEX Standard Blade In Line Fuse Holder, Red, 1 Way, 35A - Single Pack - ACX1711RBL
2005 Suzuki Swift headlight bulbs — what they do and how to look after them
Headlight bulbs are absolutely relevant to the 2005 Suzuki Swift. Technical sources including the Suzuki Swift Owner’s Manual (2005 AU/NZ) and Suzuki Service Manual (RS413/RS415) specify halogen headlamp bulbs, typically H4 12V 60/55W for combined low and high beam in this model. Reputable AU/NZ bulb catalogues list H4 for the 2005 Swift as well. So yes—this Swift definitely uses headlight bulbs.
On this generation Swift, the headlight bulbs do the heavy lifting for safe night driving and poor-weather visibility. The H4 halogen globe handles both low and high beam in a single capsule, throwing a clean cutoff on dip and a wider, longer pattern on high. Beyond safety, keeping bulbs healthy helps the car pass WOF and roadworthy checks under NZTA and ADR rules.
Owners will get the best results by replacing bulbs in pairs, even if only one has failed. Halogens dim with age, so a fresh matched set restores balance left to right. Stick with 12V 60/55W H4 bulbs, higher wattage can overheat wiring and reflectors and may not be legal. If tempted by LED conversions, remember most drop-in LEDs in halogen housings aren’t compliant and can mess with beam pattern.
DIY replacement is straightforward and usually done from the engine bay. A quick guide:
- Turn off the ignition and lights. Open the bonnet.
- Twist off the rubber dust cap on the rear of the headlamp.
- Unplug the three-pin connector, release the wire spring clip, and withdraw the bulb.
- Install the new H4 bulb with the locating tabs aligned. Don’t touch the glass—use gloves or a clean tissue.
- Refit the clip, connector, and dust cap, then test both beams.
Helpful maintenance tips: keep the headlamp lenses clean inside and out, replace cracked or loose dust caps to stop moisture, check earth points and the headlight fuse if lights are dim or flickering, and confirm headlight aim after bulb changes or bumps. Quality +30% or +50% output halogens can brighten the road without changing wattage, but expect slightly shorter lifespan. For most drivers, a good replacement cycle is every 2–4 years or at the first sign of yellowing, dimming, or uneven light.
Popular questions about 2005 Suzuki Swift headlight bulbs
What headlight bulb type fits a 2005 Suzuki Swift?
Most AU/NZ 2005 Swifts use H4 12V 60/55W halogen for combined low/high beam. Variations exist by trim and market, so it’s smart to confirm against the owner’s manual or the marking on the headlamp housing before buying.
Parking/position bulbs and indicators are separate small globes, check the handbook for those sizes if needed.
Can LED bulbs be fitted to a 2005 Swift’s halogen headlights?
Generally, no—drop-in LED replacements in halogen reflector housings are typically not road-legal in Australia and New Zealand unless specifically certified and compliant. They can also create glare and a poor beam pattern. For legal and safe lighting, use quality H4 halogen bulbs matched to OEM wattage.
How often should headlight bulbs be replaced?
There’s no strict interval, but halogens usually last 2–4 years depending on usage and vibration. Replace at the first sign of dimming, colour shift, or flicker. Always change in pairs to maintain balanced light output and beam pattern.