Your Selected Vehicle
Parts for your 2005 Nissan Tiida-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Tail Lights Replacement and Maintenance for Your 2005 Nissan Tiida
Ensuring the tail lights on your 2005 Nissan Tiida are in optimal working condition is both a matter of safety and legality. They are crucial for signaling to other drivers and enhancing visibility during low-light conditions. If you notice any issues with your tail lights, whether they're flickering or completely out, it's important to address them promptly.
Replacing or maintaining your tail lights doesn't have to be a daunting task. It involves a few straightforward steps you can follow to ensure your lights are functioning properly:
- Inspect and Diagnose: Start by checking your tail lights for any dead bulbs, cracked lenses, or any other visible damage. If one light is out, it might be just a bulb, but if both are out, it could be a fuse or wiring issue.
- Choose the Right Bulb: Ensure you have the correct replacement bulbs for your Tiida. While most models use standard bulbs, referring to your owner's manual for the correct specifications is advisable before making any purchase.
- Replacement Process:
- Open the boot to access the tail light panel through the vehicle's trim. You may need a screwdriver to remove any securing clips or screws.
- Gently remove the light housing. Be cautious to avoid tugging too firmly as it could damage the wiring.
- Remove the non-working bulb by twisting it out of its socket. Insert the new bulb, ensuring it's securely fastened.
- Reattach the lens, securing any screws or clips you initially removed. Test the new bulbs by turning on your vehicle's lights to verify they illuminate correctly.
- Regular Maintenance Tips:
- Clean the lens and the lights periodically. Dust and grime can reduce the brightness of your tail lights. Wipe them with a soft cloth and a non-abrasive cleaner.
- Check the alignment. Misaligned lights can reduce visibility. If you've recently replaced bulbs and notice visibility issues or receive signals from other vehicles, consider having the alignment checked.
- Stay informed on wiring. If you notice a recurring issue with your lights, there could be a wiring problem. In such cases, it's best to consult a professional mechanic.
- Spares and Tools: Keep spare bulbs and essential tools like a screwdriver in your vehicle. This readiness can be a lifesaver during unexpected tail light outages, especially when you're far from a service station.
Regular attention to your 2005 Nissan Tiida's tail lights can prevent potential safety hazards and ensure smooth, stress-free driving experiences. Remember, safety checks and regular maintenance not only comply with road regulations but also boost your car's dependability and longevity.