Your Selected Vehicle
Parts for your 2005 Mitsubishi Lancer-Headlight bulbs
Explore 4WD & Adventure
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
LED Autolamps 12V Interior Strip lamp Touch Sensor Switch With MCU Circuitry - 40260SMCU
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps Multi Volt Round Indicator Lamp With Amber Lens Recessed Mount - 102AM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
LED Autolamps 24V Front Indicator And Park Light Chrome Bezel Blister Pack - 285CAW24
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
2005 Mitsubishi Lancer Headlight Bulbs
Headlight bulbs are absolutely used on the 2005 Mitsubishi Lancer. Technical references including the 2005 Lancer owner’s manual and major automotive bulb catalogues (Philips, Osram, Sylvania) list replaceable halogen headlight bulbs for this model. Depending on market and trim, common fitments include a dual‑filament 9007/HB5 or H4 for combined high/low beam, while performance variants (e.g., Evolution) may split the beams across different bulbs. So yes—headlight bulbs are relevant for this vehicle.
On a 2005 Lancer, the headlight bulbs do the heavy lifting for safe night driving and poor‑weather visibility. They project a properly shaped beam so the driver can see the road without blinding oncoming traffic. Because they’re halogen on most trims, brightness and colour stay compliant with local standards while being easy and affordable to replace.
As part of routine servicing, it’s smart to check beam aim, lens clarity, and bulb condition. Halogen bulbs dim with age, so even if one hasn’t blown, output can drop off noticeably after a few years. Most drivers will notice a whiter, brighter result by replacing in pairs. If the lenses are hazy, a quick restoration can make just as much difference as new bulbs.
- Confirm the exact bulb type by VIN/trim—many Lancers use 9007/HB5 or H4, Evo variants may differ.
- Replace in pairs to keep light output even left to right.
- Avoid touching the glass—oils from fingers shorten bulb life, use gloves or a clean tissue.
- Check fuses and headlight connectors if a new bulb doesn’t light.
- Inspect and clean the earth (ground) points to prevent flicker or dimming.
- After fitting, verify beam alignment against a flat wall and adjust if needed.
Considering an upgrade? Premium halogen bulbs can boost brightness while staying ADR/NZTA compliant. LED retrofit globes may not be road‑legal in halogen housings, and can scatter light or fail compliance checks, so it pays to confirm local rules before fitting. For most daily drivers, a quality halogen globe, clear lenses, and correct aim deliver the best, legal result.
Popular questions
What headlight bulb fits a 2005 Mitsubishi Lancer?
Fitment varies by market and trim. Many 2005 Lancers use a dual‑filament 9007/HB5 or H4 for high/low in one globe. Evolution models often split high and low into separate bulbs. The safest bet is to confirm via the owner’s manual, an OEM parts listing, or a trusted bulb catalogue using the vehicle’s VIN.
How often should the headlight bulbs be replaced?
There’s no fixed kilometre interval, but halogen bulbs dim over time. If they’re more than 2–4 years old, night vision may be noticeably worse. Replace in pairs when one fails, or proactively if output has dulled, the lenses are clear, and aim is correct yet visibility still feels lacking.
Can LED bulbs be used in a 2005 Lancer’s halogen headlights?
LED retrofit globes in halogen housings may not be road‑legal in Australia or New Zealand unless they’re specifically approved and matched to a compliant housing. They can produce glare and poor beam focus. If considering LED, check ADR/NZTA rules and ensure any retrofit is tested and compliant, otherwise stick to quality halogen upgrades.