Parts for your 2004 Toyota Kluger-Drive belt

2004 Toyota Kluger drive belt — what it does and when to replace it

Technical sources confirm a drive belt is absolutely relevant on the 2004 Toyota Kluger. Toyota’s service literature for the XU20 Kluger/Highlander platform details inspection and replacement of the “V‑ribbed (serpentine) drive belt,” and the Toyota Electronic Parts Catalogue lists a drive belt for both the 4‑cylinder (2AZ‑FE) and V6 (3MZ‑FE) variants. Leading parts catalogues (e.g., Gates and Dayco application guides) also specify accessory drive belts for these engines. So yes — this Kluger is fitted with a drive belt.

On a 2004 Kluger, the drive belt spins the vital front‑of‑engine accessories under the bonnet. It turns the alternator to keep the battery and electrics happy, runs the power steering pump for easy steering, and drives the air‑con compressor for cold air on hot days. On the 2.4‑litre 2AZ‑FE, the belt also drives the water pump