Your Selected Vehicle
Parts for your 2004 Suzuki Swift-Headlight bulbs
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
LED Autolamps 12/24V Stop/Tail Lamp 49 LEDs With Bracket And 30cm Wire - 100RM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
Explore 4WD & Adventure
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps 12/24V Reverse Light 200x50mm With 25 LEDs Black Bracket - 200BWM
LED Autolamps Red LED Stop/Tail Lamp Insert For J3 Series Blister Pack - J3RM
LED Autolamps Multi Volt Rear Combination LED Lamp With Grey Housing And Base - 275GARWMB
LED Autolamps 12V Round Stop/Tail Lamp With Red Lens Recessed Mount - 102R
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMB
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIM
2004 Suzuki Swift headlight bulbs
Headlight bulbs are absolutely used on the 2004 Suzuki Swift. Suzuki’s owner’s and workshop manuals for 2004 Swift models (RS413/SF413) specify replaceable halogen headlight bulbs, and road rules like ADR 13/00 (AU) and the NZ Land Transport Rule: Vehicle Lighting 2004 assume serviceable bulbs in these headlamps. For most AU/NZ-delivered 2004 Swifts the low/high beam is a single H4 12V 60/55W halogen bulb, always confirm against the owner’s manual or the original bulb markings, especially on grey imports.
On this Swift, the headlight bulbs provide the critical forward illumination needed for safe night driving and to stay compliant at rego or WOF time. They’re designed to be replaceable when they age, dim, or fail, and swapping them is a quick bit of maintenance that restores proper beam pattern and brightness.
When replacing the 2004 Suzuki Swift headlight bulbs, the goal is a clean, correctly aligned beam with no glare to oncoming traffic. Most owners stick with quality H4 halogen bulbs in the factory wattage. Premium “+” halogens can boost brightness without overloading wiring. Avoid touching the glass, skin oils create hot spots that shorten bulb life.
- Park on level ground, switch off lights, and pop the bonnet.
- From behind the headlamp, unplug the 3‑pin connector from the bulb.
- Peel back the rubber dust boot.
- Release the spring clip, then withdraw the old H4 bulb.
- Fit the new bulb with the locating tabs aligned, do not touch the glass.
- Refit the clip and boot, plug in the connector, and repeat the other side.
- Turn lights on and check beam height against a wall, adjust if needed.
- Replace bulbs in pairs to keep light colour and brightness matched.
- If output still seems poor, clean the lenses and check for lens haze.
- If a bulb blows quickly, inspect headlight fuses, earths, and system voltage.
- LED/HID retrofits in halogen housings are typically not ADR/NZ compliant and can cause glare.
As part of routine servicing, a quick bulb check, lens clean, and beam aim check will keep the Swift comfortable on dark rural roads and ready for its next WOF or rego inspection.
Popular questions about 2004 Suzuki Swift headlight bulbs
What bulb type fits a 2004 Suzuki Swift?
Most AU/NZ 2004 Swifts take an H4 12V 60/55W halogen for combined low/high beam. Always verify on the owner’s manual or the bulb you remove, as some imports can differ.
How often should headlight bulbs be replaced?
There’s no fixed interval, but halogens dim over time. Many owners replace every 2–3 years proactively or at the first sign of yellowing or flicker. Replace in pairs for balanced lighting.
Are LED or HID bulbs legal in a 2004 Swift headlamp?
Drop‑in LED/HID bulbs in halogen reflector housings are commonly non‑compliant under ADR/NZ rules and can cause glare. If upgrading, stick to quality halogen options or use a fully compliant lamp assembly designed for LED/HID with correct self‑levelling/washer requirements where applicable.