Your Selected Vehicle
Parts for your 2004 Suzuki Jimny-Headlight bulbs
Explore 4WD & Adventure
Repco by Century Car Battery Superior Performance 330CCA - NS40Z MF
LED Autolamps 12/24V LED Number Plate Light LED With 0.14M Lead (2 pce) - 30BLM
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator Twin Blister - 385ARWM-2
LED Autolamps 12V Stop/Tail Strip Lamp With 10 Square LEDs Recessed Mount - 235R12
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflector 100x100x22mm - 101BAR
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
LED Autolamps 12V LED Stop/Tail/Indicator/Licence Plate Lamp with Reflex Reflector - 99ARL
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Diffused Tail Light - 284ARWM-2
LED Autolamps 12V LED Stop/Tail/Indicator Lamps With Reflector Twin Blister - 101BAR2
LED Autolamps 12/24V Amber Marker Clear Lens Coloured LEDs Stainless Steel Bezel - 86AM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Amber Red LED Light - 282ARWM
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
LED Autolamps 12V Indicator Strip Lamp With 10 Square LEDs Recessed Mount - 235A12
2004 Suzuki Jimny Headlight Bulbs
Headlight bulbs are absolutely relevant and used on the 2004 Suzuki Jimny. The model runs replaceable halogen globes: H4 dual‑filament, 12V 60/55W. This fitment is specified in the Suzuki Jimny (SN413) owner’s manual bulb chart and is echoed by major bulb catalogues and application guides used in workshops across AU/NZ, including Narva and OSRAM/Philips listings for 1998–2005 Jimny models.
On a 2004 Jimny, the H4 globe handles both low and high beam in the one bulb. Its job is simple but vital: throw a clean, well‑aimed beam so night driving, rural trips, and wet‑weather commutes stay safe. Over time, halogen filaments age, output drops, and colour shifts, so even before a globe fully blows, visibility can suffer.
As part of routine servicing, it’s smart to check headlight brightness and beam pattern. If one globe fails, replace both so the colour and output match. Stick with the OEM spec 60/55W to avoid heat damage or wiring stress. If chasing more punch, choose quality +performance H4 halogens compliant with ADR/NZS rules rather than over‑wattage options.
- Open the bonnet and unplug the headlight connector from the rear of the housing.
- Peel back the rubber dust boot and unclip the spring retainer.
- Remove the old H4 globe. Avoid touching the glass on the new one, use gloves or the box.
- Seat the new globe with the locating tabs aligned, refit the spring, boot, and connector.
- Test low and high beam, then check headlight aim against a flat wall.
If the beam looks scattered or dim after fitting, inspect the lens for haze and the housing for moisture. A light polish of the exterior plastic lens can restore a lot of lost output. For LED conversions, be mindful: many drop‑ins won’t produce a legal or safe beam in the Jimny’s reflector and may not pass WOF/roadworthy—choose ADR/NZS‑compliant kits only, if permitted.
Service tip: keep a spare H4 in the glovebox and do a quick night‑time check once a month. It’s cheap insurance for winter mornings and late‑arvo trail runs.
Popular questions about 2004 Suzuki Jimny headlight bulbs
What bulb type does a 2004 Jimny use?
It takes an H4 halogen dual‑filament globe, 12V 60/55W, covering both low and high beam. That spec is the go‑to across AU/NZ parts counters and aligns with Suzuki’s bulb chart for the SN413 Jimny.
How often should the bulbs be replaced?
There’s no hard interval, but many halogens lose brightness after 2–3 years. Replace at the first sign of dimming, colour change, or if one fails—swap both sides together for even light and colour.
Can LED bulbs be fitted to a 2004 Jimny?
They can be physically fitted, but many generic LEDs don’t form a proper beam in the Jimny’s reflector and may not be legal. If considering LEDs, choose ADR/NZS‑compliant options and check local rules and inspection requirements.