Your Selected Vehicle
Parts for your 2004 Nissan Primera-Headlights
Explore 4WD & Adventure
Narva Model 72 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva MDL34 Stop/Tail/Indicator Light With Licence Plate Lamp LED 12V - 2 Pce - 93440BL2
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva 9-33 Volt Surface Mount LED front end outline marker(white) with Chrome cover and 0.5m cable and Deutsch connector - 96812-D
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
2004 Nissan Primera headlights — purpose, care, and easy replacement tips
Headlights are absolutely fitted and relevant on the 2004 Nissan Primera (P12). Technical references including the Nissan Primera P12 Owner’s Manual and Nissan Electronic Service Manual (Lighting section) detail headlamp specifications, bulb replacement, and aiming procedures. The model’s lighting also complies with road regulations such as Australia’s ADR 13/00 and New Zealand WOF lighting requirements, which mandate operational headlamps for legal road use.
On a 2004 Primera, the headlights do the heavy lifting for night vision and daytime conspicuity. They light up the lane, road edges, signs and hazards, and make the car more visible to others in rain, dusk, and fog. Many P12 variants use halogen bulbs, typically H7 for low beam and H1 or HB3 for high beam, while some higher trims were factory-equipped with HID/Xenon low beams. Either way, keeping the lights in top nick is a big safety win.
As part of regular servicing, it’s worth checking beam aim, lens clarity, and bulb condition. If a bulb’s gone, replace in pairs so output and colour match. On halogens, avoid touching the glass with bare fingers—skin oils can shorten bulb life. If the connector looks a bit crusty, a light dab of dielectric grease can help fend off corrosion. For HID systems (if fitted), note the high voltage