Your Selected Vehicle
Parts for your 2004 Holden Commodore-Headlight bulbs
Cole Hersee 500A Dual Pole Master Disconnect Switch, 48V DC Yellow Handle - TR Series - 880175-0002BX
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
OEX 10mm Twin Core Automotive Cable, Red/Black, With Clear Sheath - 30m Roll - ACX0823
Fitment Notes:
OEX 6mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 100m Roll (NZ Ref. 157) - ACX0811L
Fitment Notes:
OEX Engine Shut Down Solenoid 12V - Pull Rating 10.9Kg/cm2 1751 Series - ACX3332
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva 12/24V Aeromax LED Mini Light Bar Amber w/ Clear Lens Single Bolt Mount - 85011AC
Fitment Notes:
OEX 5mm Single Core Tinned Marine Cable, Orange - 100m Roll (NZ Ref. 154M) - ACX0893
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
Narva 4 Way Rocker Switch Panel Off/On SPST Red LED (Contacts Rated 20A @ 12V) - 63190
Fitment Notes:
LED Autolamps Traffic Advisory Light Green LED 12v Only Green Lens 10cm Cable Boxed - 83G
Fitment Notes:
Everything You Need to Know About Headlight Bulbs for the 2004 Holden Commodore
The 2004 Holden Commodore comes equipped with headlight bulbs just like most vehicles of its time. These bulbs are an essential part of the vehicle's lighting system, providing visibility for the driver during low light conditions and ensuring the car can be seen by others on the road. Understanding the purpose of these headlight bulbs and how to maintain or replace them is key to keeping the Commodore safe and roadworthy.
Headlight bulbs on the 2004 Holden Commodore serve the primary function of illuminating the road ahead. They are located inside the headlight assembly at the front of the car. These bulbs help the driver see clearly at night, during fog, or in other situations where natural light is limited. Additionally, they act as a signal to other drivers and pedestrians, making the Commodore visible in the dark or poor weather conditions.
Typically, the 2004 Holden Commodore uses halogen headlight bulbs, which were the industry standard at that time. Halogen bulbs are reliable, provide a decent amount of brightness, and are readily available across automotive stores. They work by passing an electric current through a tungsten filament enclosed in a halogen gas-filled bulb, which produces light when heated.
When it comes to servicing or replacing headlight bulbs on the 2004 Holden Commodore, it's useful to keep a few tips in mind to ensure optimal performance and safety:
- Check the owner's manual: The manual provides the exact bulb specifications needed for your Commodore's model and trim. Using the correct bulb type ensures compatibility and proper fitment.
- Inspect bulbs regularly: Make it a habit to check both headlights frequently. Look for signs like dim light output, flickering, or complete failure. A burnt-out bulb means reduced visibility and increased risk of accidents.
- Replace bulbs in pairs: If one bulb fails, it's often a good idea to replace both at the same time. This prevents uneven lighting and keeps the beam pattern consistent, which is essential for safe driving at night.
- Avoid touching the glass: When fitting new bulbs, do not handle the glass part with your bare fingers. Oils from your skin can cause the bulb to overheat and fail prematurely. Use gloves or a clean cloth during installation.
- Check headlight alignment: After replacing bulbs, verify that the headlights are properly aligned. Poor alignment can reduce visibility or dazzle oncoming drivers, which is both dangerous and illegal.
- Use quality replacements: While cheaper bulbs might be tempting, investing in well-known, reliable brands ensures better lifespan and brightness, contributing to safer travels.
- Replace bulbs promptly: Don't wait until nightfall or poor conditions to find out your bulbs are no longer working. Early replacement will save you from inconvenient, potentially hazardous situations.
Beyond replacement, maintaining headlight bulbs as part of regular vehicle servicing is smart. Keeping the headlight lenses clean and checking the electrical connections can prevent failure. Over time, dirt and oxidation can dull the plastic lenses, reducing the effectiveness of even brand new bulbs. Using specialised headlight restoration kits can restore clarity and improve light output drastically.
For those who prefer a DIY approach, replacing headlight bulbs in a 2004 Holden Commodore is relatively straightforward. Usually, the process involves opening the bonnet, accessing the back of the headlight assembly, unplugging the old bulb, and fitting a new one without requiring special tools. However, if unsure, consulting a professional mechanic ensures the job is done correctly.
Headlight bulbs are critical safety components for the 2004 Holden Commodore. Whether it's cruising through city streets or travelling on the highway, clear, efficient headlights make all the difference. Staying on top of bulb condition and replacing them as needed contributes to safer driving and avoids those last-minute hassles on dim, dark nights.