Your Selected Vehicle
Parts for your 2004 Holden Commodore-Headlight bulbs
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Fitment Notes:
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
Fitment Notes:
Narva Push/Pull Headlamp Switch Off/On/On DPDT (Contacts Rated 30A @ 12V) - 60013BL
Fitment Notes:
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref.153) - ACX0808-5BL
Fitment Notes:
OEX 12mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1294L
Fitment Notes:
Explore 4WD & Adventure
OEX Mini Relay 12V 5 Pin Change Over 30/40A (30 & 86 terminals are reversed) Resistor Protected, Sealed - ACX1938RBL
Fitment Notes:
Narva Adhesive Lined Heatshrink Male 4mm Blade Terminal Blue 20 Pack - 56322BL
Fitment Notes:
OEX 2mm Twin Core, Tinned Marine Cable, Red/Black with White Sheath, 100m Roll - ACX0985L
Fitment Notes:
LED Autolamps 90 Series Amber Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90AM
Fitment Notes:
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
Fitment Notes:
OEX Integrated Flood Work Light / Amber Warning Light / Reverse Light 12V/24V SAE Class 1 - ACX5587
Fitment Notes:
Narva Marine 12V Dual Colour LED Strip Lamp with Touch Switch (White/Blue) - 87538WBBL
Fitment Notes:
OEX Integrated Spot Work Light / Amber Warning Light / Reverse Light 12V/24V SAE Class 1 - ACX5586
Fitment Notes:
OEX Fuse Box, Standard Blade, 12 Way, Maximum total Amperage 150A at 12V, Negative Busbar - ACX5124
Fitment Notes:
Everything You Need to Know About Headlight Bulbs for the 2004 Holden Commodore
The 2004 Holden Commodore comes equipped with headlight bulbs just like most vehicles of its time. These bulbs are an essential part of the vehicle's lighting system, providing visibility for the driver during low light conditions and ensuring the car can be seen by others on the road. Understanding the purpose of these headlight bulbs and how to maintain or replace them is key to keeping the Commodore safe and roadworthy.
Headlight bulbs on the 2004 Holden Commodore serve the primary function of illuminating the road ahead. They are located inside the headlight assembly at the front of the car. These bulbs help the driver see clearly at night, during fog, or in other situations where natural light is limited. Additionally, they act as a signal to other drivers and pedestrians, making the Commodore visible in the dark or poor weather conditions.
Typically, the 2004 Holden Commodore uses halogen headlight bulbs, which were the industry standard at that time. Halogen bulbs are reliable, provide a decent amount of brightness, and are readily available across automotive stores. They work by passing an electric current through a tungsten filament enclosed in a halogen gas-filled bulb, which produces light when heated.
When it comes to servicing or replacing headlight bulbs on the 2004 Holden Commodore, it's useful to keep a few tips in mind to ensure optimal performance and safety:
- Check the owner's manual: The manual provides the exact bulb specifications needed for your Commodore's model and trim. Using the correct bulb type ensures compatibility and proper fitment.
- Inspect bulbs regularly: Make it a habit to check both headlights frequently. Look for signs like dim light output, flickering, or complete failure. A burnt-out bulb means reduced visibility and increased risk of accidents.
- Replace bulbs in pairs: If one bulb fails, it's often a good idea to replace both at the same time. This prevents uneven lighting and keeps the beam pattern consistent, which is essential for safe driving at night.
- Avoid touching the glass: When fitting new bulbs, do not handle the glass part with your bare fingers. Oils from your skin can cause the bulb to overheat and fail prematurely. Use gloves or a clean cloth during installation.
- Check headlight alignment: After replacing bulbs, verify that the headlights are properly aligned. Poor alignment can reduce visibility or dazzle oncoming drivers, which is both dangerous and illegal.
- Use quality replacements: While cheaper bulbs might be tempting, investing in well-known, reliable brands ensures better lifespan and brightness, contributing to safer travels.
- Replace bulbs promptly: Don't wait until nightfall or poor conditions to find out your bulbs are no longer working. Early replacement will save you from inconvenient, potentially hazardous situations.
Beyond replacement, maintaining headlight bulbs as part of regular vehicle servicing is smart. Keeping the headlight lenses clean and checking the electrical connections can prevent failure. Over time, dirt and oxidation can dull the plastic lenses, reducing the effectiveness of even brand new bulbs. Using specialised headlight restoration kits can restore clarity and improve light output drastically.
For those who prefer a DIY approach, replacing headlight bulbs in a 2004 Holden Commodore is relatively straightforward. Usually, the process involves opening the bonnet, accessing the back of the headlight assembly, unplugging the old bulb, and fitting a new one without requiring special tools. However, if unsure, consulting a professional mechanic ensures the job is done correctly.
Headlight bulbs are critical safety components for the 2004 Holden Commodore. Whether it's cruising through city streets or travelling on the highway, clear, efficient headlights make all the difference. Staying on top of bulb condition and replacing them as needed contributes to safer driving and avoids those last-minute hassles on dim, dark nights.