Your Selected Vehicle
Parts for your 2004 Holden Commodore-Headlight bulbs
OEX 4mm Single Core Automotive Cable, Brown With White Trace- 30m Roll (NZ Ref.152) - ACX0738
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Green With White Trace - 30m Roll (NZ Ref.152) - ACX0742
Fitment Notes:
Explore 4WD & Adventure
OEX 4mm Single Core Automotive Cable, Green With Violet Trace - 30m (NZ Ref.152) - ACX0747
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Red With Blue Trace - 30m Roll (NZ Ref.152) - ACX0743
Fitment Notes:
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMCSB
Fitment Notes:
Narva Crimp Terminal Female Blade Blue Terminal Entry 6.3 x 0.8mm Heat Shrinkable 50Pk - 56330
Fitment Notes:
OEX 4mm Single Core Automotive Cable, White With Brown Trace - 30m Roll (NZ Ref.152) - ACX0744
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Green With Black Trace - 30m (NZ Ref.152) - ACX0748
Fitment Notes:
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMCSB
Fitment Notes:
LED Autolamps Twin function front position with supplementary front indicator - 97WIMCSB
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Brown With Blue Trace - 30m Roll (NZ Ref.152) - ACX0745
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,060mm, Stud Hole - 10mm - ACX1014
Fitment Notes:
Narva AMP Super Seal 1 Way Waterproof Connector with Terminals and Seals Female Housing 14A Pack of 10 - 57501
Fitment Notes:
Narva Crimp Terminal Female Blade Blue Terminal Entry 6.3 x 0.8mm Polycarbonate 100 Pce - 56143
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Yellow With Blue Trace - 30m Roll (NZ Ref.152) - ACX0739
Fitment Notes:
Everything You Need to Know About Headlight Bulbs for the 2004 Holden Commodore
The 2004 Holden Commodore comes equipped with headlight bulbs just like most vehicles of its time. These bulbs are an essential part of the vehicle's lighting system, providing visibility for the driver during low light conditions and ensuring the car can be seen by others on the road. Understanding the purpose of these headlight bulbs and how to maintain or replace them is key to keeping the Commodore safe and roadworthy.
Headlight bulbs on the 2004 Holden Commodore serve the primary function of illuminating the road ahead. They are located inside the headlight assembly at the front of the car. These bulbs help the driver see clearly at night, during fog, or in other situations where natural light is limited. Additionally, they act as a signal to other drivers and pedestrians, making the Commodore visible in the dark or poor weather conditions.
Typically, the 2004 Holden Commodore uses halogen headlight bulbs, which were the industry standard at that time. Halogen bulbs are reliable, provide a decent amount of brightness, and are readily available across automotive stores. They work by passing an electric current through a tungsten filament enclosed in a halogen gas-filled bulb, which produces light when heated.
When it comes to servicing or replacing headlight bulbs on the 2004 Holden Commodore, it's useful to keep a few tips in mind to ensure optimal performance and safety:
- Check the owner's manual: The manual provides the exact bulb specifications needed for your Commodore's model and trim. Using the correct bulb type ensures compatibility and proper fitment.
- Inspect bulbs regularly: Make it a habit to check both headlights frequently. Look for signs like dim light output, flickering, or complete failure. A burnt-out bulb means reduced visibility and increased risk of accidents.
- Replace bulbs in pairs: If one bulb fails, it's often a good idea to replace both at the same time. This prevents uneven lighting and keeps the beam pattern consistent, which is essential for safe driving at night.
- Avoid touching the glass: When fitting new bulbs, do not handle the glass part with your bare fingers. Oils from your skin can cause the bulb to overheat and fail prematurely. Use gloves or a clean cloth during installation.
- Check headlight alignment: After replacing bulbs, verify that the headlights are properly aligned. Poor alignment can reduce visibility or dazzle oncoming drivers, which is both dangerous and illegal.
- Use quality replacements: While cheaper bulbs might be tempting, investing in well-known, reliable brands ensures better lifespan and brightness, contributing to safer travels.
- Replace bulbs promptly: Don't wait until nightfall or poor conditions to find out your bulbs are no longer working. Early replacement will save you from inconvenient, potentially hazardous situations.
Beyond replacement, maintaining headlight bulbs as part of regular vehicle servicing is smart. Keeping the headlight lenses clean and checking the electrical connections can prevent failure. Over time, dirt and oxidation can dull the plastic lenses, reducing the effectiveness of even brand new bulbs. Using specialised headlight restoration kits can restore clarity and improve light output drastically.
For those who prefer a DIY approach, replacing headlight bulbs in a 2004 Holden Commodore is relatively straightforward. Usually, the process involves opening the bonnet, accessing the back of the headlight assembly, unplugging the old bulb, and fitting a new one without requiring special tools. However, if unsure, consulting a professional mechanic ensures the job is done correctly.
Headlight bulbs are critical safety components for the 2004 Holden Commodore. Whether it's cruising through city streets or travelling on the highway, clear, efficient headlights make all the difference. Staying on top of bulb condition and replacing them as needed contributes to safer driving and avoids those last-minute hassles on dim, dark nights.