Skip to content Skip to navigation menu

Your Selected Vehicle

Categories

  • Oils & Fluids
  • Greases & Lubricants

Brands

Price

Parts for your 2004 Ford Falcon-Engine oil

Sort by
CRC 556 Multipurpose 420ml - 1751837
MULTI BUY
CRC

CRC 556 Multipurpose 420ml - 1751837

$15
Fitment Notes:
See More
WD40 Multi Purpose Lubricant 300g - WD61103
MULTI BUY

WD40 Multi Purpose Lubricant 300g - WD61103

$20
Fitment Notes:
See More
CRC 5.56 with Permastraw 210ml - 5028
CRC

CRC 5.56 with Permastraw 210ml - 5028

$12
Fitment Notes:
See More
Penrite Cam Assembly Lube 100g Tube - CAM0001

Penrite Cam Assembly Lube 100g Tube - CAM0001

$34
Fitment Notes:
See More
CRC 556 Marine 420ml - 1751839
CRC

CRC 556 Marine 420ml - 1751839

$22
Fitment Notes:
See More
Motortech Water Dispersant Spray 350g - MT002

Motortech Water Dispersant Spray 350g - MT002

$9
Fitment Notes:
See More

Explore 4WD & Adventure

CRC Long Life Anti Rust 300g - 3097
CRC

CRC Long Life Anti Rust 300g - 3097

$38
Fitment Notes:
See More
WD40 Multi Purpose Lubricant 255g - WD61152

WD40 Multi Purpose Lubricant 255g - WD61152

$19
Fitment Notes:
See More
CRC 5.56 with Permastraw 380ml - 5029
CRC

CRC 5.56 with Permastraw 380ml - 5029

$16
Fitment Notes:
See More
CRC 556 Marine 4L - 1751848
CRC

CRC 556 Marine 4L - 1751848

$94
Fitment Notes:
See More
CRC 556 Industrial 420ml - 1751842
CRC

CRC 556 Industrial 420ml - 1751842

$27
Fitment Notes:
See More
CRC 556 Low Odour 420ml - 1751840
CRC

CRC 556 Low Odour 420ml - 1751840

$17
Fitment Notes:
See More
WD40 EZ-Reach Multi Purpose Lubricant 425g - WD61180

WD40 EZ-Reach Multi Purpose Lubricant 425g - WD61180

$34
Fitment Notes:
See More
CRC 556 Multipurpose 4L - 1751846
CRC

CRC 556 Multipurpose 4L - 1751846

$106
Fitment Notes:
See More
Showing 1 - 16 of 16 products

Engine Oil Maintenance for Your 2004 Ford Falcon

The 2004 Ford Falcon is a reliable and popular vehicle that requires regular maintenance to ensure it runs smoothly. One of the crucial aspects of maintaining your Falcon is paying attention to the engine oil. The right engine oil not only lubricates the moving parts but also helps in cooling the engine, reducing wear, and prolonging the life of your vehicle. For the 2004 Ford Falcon, using the correct type of engine oil is essential for optimal performance.

When it comes to changing the engine oil in your 2004 Ford Falcon, it's important to adhere to a regular schedule. Generally, engine oil should be replaced every 5,000 to 7,500 kilometres, but it's always wise to refer to your Falcon's owner's manual for the manufacturer's recommendations. This will provide guidance specific to your vehicle's needs. Regular oil changes ensure that your engine remains healthy and free of contaminants that could potentially cause damage.

Choosing the right engine oil is vital. For the 2004 Ford Falcon, it's typically recommended to use a high-quality multi-grade oil like 10W-30 or 5W-30, depending on the climate and driving conditions. The "W" stands for winter, and the numbers refer to the oil's viscosity rating. A lower number before the "W" indicates better performance in colder temperatures, while a higher number indicates better protection at higher temperatures. Selecting the right viscosity ensures that the oil flows well under cold conditions while providing sufficient protection when the engine is hot.

Once you've selected the correct oil, it's time to perform the oil change. Here's a handy checklist to guide you through the process:

  1. Warm up your engine by letting it run for a few minutes. This helps the oil to drain out smoothly.
  2. Secure your Falcon on a level surface and raise the front with a jack for easier access to the oil pan.
  3. Place an oil catch pan underneath the oil pan, and carefully remove the oil drain plug using a wrench to let the old oil drain out completely.
  4. Replace the oil drain plug after ensuring the old oil has completely drained.
  5. Remove the old oil filter with an oil filter wrench, lubricate the gasket on the new oil filter with a bit of fresh oil, and install it securely.
  6. Refill the engine with new oil through the oil filler cap. Use a funnel to avoid spills and check the level with the dipstick to make sure it's within the recommended range.
  7. Start the engine and let it run for a few minutes to circulate the new oil, then turn it off and check for leaks.
  8. After allowing the engine to rest for a minute, recheck the oil level with the dipstick and top up if necessary.

Regularly checking the oil level and condition between changes is equally important. Pop the bonnet and pull out the dipstick every few weeks. This quick check will help ensure that your engine always has enough oil and is not consuming it too quickly. If you notice the oil is black and gritty, it's time for a change, or if the level is low, you need to top it up.

  • Take note of any unusual signs like excessive engine noise or smoke coming from the exhaust, as these could indicate oil-related issues.
  • Using an engine flush can help remove accumulated sludge and deposits when changing oil, aiding in your Falcon's performance and longevity.

Neglecting regular oil changes can lead to severe engine damage and costly repairs, so setting reminders for oil changes is a smart move. Many service centres offer a servicing schedule reminder, which is a great way to keep on top of your vehicle's maintenance needs.

While doing it yourself is rewarding, if you're unsure about any aspect of the oil change process, it's always best to consult a professional mechanic. They can provide expert advice and service to ensure your 2004 Ford Falcon continues to drive smoothly without hiccups.

Regular oil changes are a small price to pay for the longevity and health of your vehicle. So, treat your Ford Falcon right, and it will provide you with reliable service for years to come.