Parts for your 2003 Toyota Altezza-Driveshafts

2003 Toyota Altezza driveshafts

Driveshafts are absolutely fitted to the 2003 Toyota Altezza. Technical sources including the Toyota Altezza (XE10) Repair Manual – Driveline/Propeller Shaft section, the Lexus IS200/IS300 (XE10) Workshop Manual, and Toyota’s Electronic Parts Catalogue confirm the model’s rear‑wheel‑drive layout with a two‑piece propeller shaft running from the transmission to the rear differential, plus short rear axle shafts (CV half‑shafts) out to each rear hub.

The Altezza’s driveshafts do the grunt work of sending engine torque to the rear wheels. The main prop shaft is typically a two‑piece unit with a centre support bearing, universal joints, and flanged ends that bolt to the transmission output and the diff input. At the rear suspension, each side uses a CV half‑shaft to handle wheel travel and keep things smooth under load. When all of this is healthy and correctly balanced, the car feels tight and refined