Your Selected Vehicle
Parts for your 2003 Honda Odyssey-Headlights
Narva 9-33 Volt Surface Mount LED rear end outline marker lamp(red) with Black cover and 0.5m cable - 96832B
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Explore 4WD & Adventure
Narva MDL38 Stop/Tail/Indicator Red-Amber Lens LED 10 to 30V - 2 Pce - 93812BL2
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Narva Model 18 LED Side Marker/Cabin Marker/FEOM Light Amber 10-30V - 91800
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Narva 9-33 Volt Surface Mount LED Side marker lamp(red/amber) with Chrome cover and 0.5m cable - 96802
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
2003 Honda Odyssey Headlights: Purpose, Care and Replacement
Technical references including the 2003 Honda Odyssey Owner’s Manual (Lighting section), the Honda Service Manual for the RA/RC platform, and roadworthiness rules such as ADR 13/00 and 46/00 (Australia) plus NZTA WoF lighting requirements all confirm this model is factory-fitted with forward headlamps. So headlights are absolutely relevant for the 2003 Honda Odyssey.
The headlights on a 2003 Odyssey are there to light the way after dark, boost visibility in poor weather, and make the vehicle easier for others to see. Most examples use halogen reflector units, delivering a dependable beam pattern suited to everyday driving. Because halogens gradually dim with age, keeping them fresh is part of sensible servicing.
Good workshop practice is to replace headlight bulbs in pairs so colour and brightness match side to side. Under the bonnet, access is generally from the rear of the headlamp. Disconnect the electrical connector, release the retaining clip or collar, remove the old bulb, and install the new one. It’s important not to touch the glass