Your Selected Vehicle
Parts for your 2003 Holden Astra-Headlights
Narva Model 72 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Explore 4WD & Adventure
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva MDL34 Stop/Tail/Indicator Light With Licence Plate Lamp LED 12V - 2 Pce - 93440BL2
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Narva 9-33 Volt Surface Mount LED front end outline marker(white) with Chrome cover and 0.5m cable and Deutsch connector - 96812-D
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
2003 Holden Astra headlights
Technical references including the 2003 Holden Astra (TS) Owner’s Handbook, GM/Opel service literature for the Astra G platform, and Australian Design Rules (ADR 13/00 – Lighting) confirm that the 2003 Holden Astra is factory-fitted with halogen headlamps. So headlights are absolutely relevant to this model.
On this Astra, the headlights do the heavy lifting after dark and in poor weather: low beam handles everyday night driving without dazzling oncoming traffic, while high beam punches further down rural roads. The assemblies also house the parkers and indicators, helping the car be seen from the front. Most TS Astras run halogen bulbs (typically H7 low beam and H1 high beam), with 12 V, 55 W ratings that meet local ADR requirements.
As part of any service, it’s smart to check the headlights for brightness, beam aim, lens clarity, and moisture. Dull output usually comes down to ageing bulbs, hazed polycarbonate lenses, or a poor earth. Replace bulbs in pairs to keep the colour and brightness even. When fitting halogens, avoid touching the glass with bare fingers and stick with ADR‑compliant 55 W options