Your Selected Vehicle
Parts for your 2002 Toyota Prius-Headlight bulbs
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack - 12WM-2
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
2002 Toyota Prius Headlight Bulbs: Purpose, Fitment and Easy Service Tips
Headlight bulbs are absolutely relevant to the 2002 Toyota Prius (NHW11). Technical references, including the Toyota Owner’s Manual for the 2002 Prius (Lighting section) and Toyota’s Electronic Parts Catalogue, list replaceable halogen headlight bulbs for this model: 9003/HB2 dual‑filament (commonly known as H4 in many markets), typically 12V 60/55W with a P43t base. That means the car uses conventional halogen bulbs for both low and high beam within the same globe.
On this Prius, the headlight bulbs provide safe forward illumination at night and in poor weather, with the low beam handling everyday driving and the high beam adding reach on open roads. Because halogens slowly dim and shift colour as they age, the best practice is to replace them in pairs to keep beam brightness and colour consistent across both sides.
Owners will find replacement straightforward from the engine bay: unplug the three‑pin connector, peel back the rubber dust cover, release the spring clip, and swap the globe. Avoid touching the glass, skin oils can create hot spots and shorten bulb life. If the lens is cloudy or yellowed, a gentle polish can restore clarity and improve output. It’s also worth checking for moisture inside the housing—replace seals or the dust cover if needed.
When servicing the 2002 Prius, a quick lighting check pays off. Look for:
- Dim, patchy or yellow light compared to new bulbs
- Intermittent flicker or one-sided failure
- Uneven beam pattern after a knock to the front end
If a bulb is out and a new globe doesn’t light, inspect the headlight fuse, the headlight relay, and the connector for corrosion. After any bulb change, confirm aim on a flat surface at night so oncoming drivers aren’t dazzled. Stick to the specified 9003/HB2 (H4) wattage—higher-wattage globes can overheat wiring and housings. Quality branded halogens deliver reliable output, are legal, and won’t stress the Prius’ 12V system.
For owners in Australia and New Zealand, the common fitment naming is H4, equivalent to 9003/HB2. Always double-check the owner’s manual or the parts label under the bonnet to confirm the exact spec for the vehicle’s market build.
Popular questions about 2002 Toyota Prius headlight bulbs
What bulb type does the 2002 Prius use?
Toyota lists a 9003/HB2 dual‑filament halogen, commonly referred to as H4 in AU/NZ. It’s typically 12V 60/55W with a P43t base. Market naming can vary, but the globe is the same form and fit. Check the owner’s manual or parts label to confirm.
How hard is it to replace the headlight bulb?
It’s a simple DIY: disconnect the battery negative for safety, unplug the three‑pin connector, remove the rubber cover, unclip the spring, swap the bulb, and refit everything. Don’t touch the glass, and test before closing the bonnet. Most owners can do it in 10–15 minutes per side.
Should bulbs be replaced in pairs?
Yes. Halogens dim progressively, so a single new bulb will look brighter and whiter than the old one. Replacing in pairs keeps the beam balanced and the car looking tidy at night.