Parts for your 2002 Toyota Land cruiser-Wheel hubs

2002 Toyota Land Cruiser Wheel Hubs — what they do and how to look after them

Wheel hubs are absolutely relevant to the 2002 Toyota Land Cruiser. Toyota’s factory literature (Toyota Repair Manual RM1145 for 100/105 Series and the Toyota Electronic Parts Catalogue) lists front and rear hub assemblies for these models. Most 100 Series with independent front suspension use fixed drive flanges (no manual locking hubs), while some 105 Series solid-axle variants in certain markets were fitted with Aisin free‑wheeling hubs. Either way, the vehicle relies on robust hub and bearing assemblies to support the wheels, manage drive torque, and keep the ABS happy.

On this Land Cruiser, the hub’s job is to carry the wheel and brake rotor, house the bearings, and couple to the axle or CV shaft. The assembly keeps everything concentric, controls bearing preload, and shields grease and seals from grit and water—vital if it’s working hard on corrugations, towing, or fording creeks.

For servicing, it pays to give the hubs regular attention. Many 2002 Land Cruisers use serviceable taper-roller front bearings that can be cleaned, inspected, repacked with quality NLGI 2 wheel-bearing grease, and adjusted to spec. Rear hubs vary by axle type: semi-float rears typically have a pressed-on bearing and retainer, while full-float setups use serviceable bearings at the hub. Always replace seals, gaskets, split pins, collars/retainers and any suspect studs during hub work, and follow the Toyota torque and end‑float settings noted in the factory manual.

If the vehicle sees heavy off‑road use or water crossings, shorten service intervals and check for milky grease, rust staining, or heat marks. Aftermarket manual hubs are sometimes fitted to IFS models to reduce front driveline wear