Your Selected Vehicle
Parts for your 2002 Nissan Pulsar-Headlights
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Explore 4WD & Adventure
Narva Crimp Terminal Male Blade Red Terminal Entry 6.3 x 0.8mm Heat Shrinkable 20 Pce - 56320BL
2002 Nissan Pulsar Headlights — Purpose, Care, and Easy Replacement Tips
Headlights are absolutely fitted to the 2002 Nissan Pulsar (N16). This is confirmed by the 2002 Nissan Pulsar Owner’s Manual and Nissan N16 Service Manual, along with Australian Design Rules ADR 13/00 (installation of lighting) and ADR 46/00 (headlamps), which mandate compliant front lighting on road vehicles.
On the Pulsar, the headlights do the heavy lifting after dark and in poor weather — making the road ahead visible and keeping the car visible to others. Most N16 trims use halogen units with a dual‑filament bulb (commonly H4) handling both low and high beam. Exact bulb specs can vary by market and trim, so it’s smart to double‑check the glovebox manual or the markings on the lamp housing.
Replacement is straightforward for a home mechanic. Pop the bonnet, unplug the connector at the rear of the headlamp, release the rubber boot and spring clip, then swap in the new bulb. Avoid touching the glass — skin oils can shorten bulb life. If a bulb’s gone, replacing both sides together keeps colour and brightness consistent. Typical halogen bulbs are 12V 60/55W, but always match what’s specified for the vehicle.
As part of regular servicing, it’s worth giving the Pulsar’s lights a once‑over every 10,000–15,000 kilometres or six months:
- Check brightness and beam pattern