Your Selected Vehicle
Filter
Filter By
Parts for your 2002 Nissan Navara-Tail lights
Repco 12V LED RearCombination Lamp Stop / Tail / Indicator / Licence Plate Pair 150x80x25mm - RLT150LBL2S3
LED Autolamps 12/24V Stop/Tail/Indicator Light Clear Lens Coloured LEDs Surface Mount - 12ARM-2
LED Autolamps Rear combination L/R tail lights with sequential indicator, Chrome, Twin Blister - 355ARWM-2
Repco 12V LED Rear Combination Lamp Stop / Tail / Indicator / Licence Plate Pair 100x100x25mm - RLT100LBL2S3
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Diffused Tail Light - 284ARWM-2
Explore 4WD & Adventure
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
LED Autolamps 12/24V LED MaxiLamp Stop/Tail/Indicator/Reflector Light Round Blister Pack - MAXILAMP1XC
LED Autolamps 12V LED Boat Trailer Lamps Stop/Tail/Indicator with Licence Plate Lamp Light Left & Right Side, with 8m cable, Twin Blister - 209GARLP2/8M
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator Twin Blister - 385ARWM-2
2002 Nissan Navara tail-lights
Tail-lights are absolutely fitted to the 2002 Nissan Navara. Technical sources including the Nissan Navara D22 owner’s and service manuals, Australia’s ADR 13/00 (Installation of Lighting and Light-signalling Devices) and ADR 49/00, plus New Zealand’s NZTA Vehicle Inspection Requirements Manual (VIRM), all require rear position (tail) lamps on road-going vehicles. So tail-lights are relevant, standard, and essential kit on the 2002 Navara.
The tail-lights on a 2002 Navara keep the ute visible from behind at night and in poor weather, marking the vehicle’s width and edges while the brighter stop lamps alert following drivers under braking. On a worksite or the weekday commute, they’re a small part that does a big safety job.
As part of regular servicing, it’s smart to check the tail-lights any time the vehicle is washed or fuelled. A quick walk-around with the park lights on will spot a failed globe, a dim lamp from a poor earth, or a cracked lens that could invite moisture. For owners who tow, it’s worth checking the trailer plug wiring hasn’t introduced faults to the rear harness.
- Common signs it’s time for attention:
- One side dimmer than the other or intermittent operation
- Globe failure warning from a tester or WOF rejection
- Condensation or water droplets inside the lens
- Discoloured, crazed, or cracked lenses
Basic replacement is straightforward: switch the lights off, open the tailgate, remove the tail-lamp fasteners, ease the cluster away, twist out the bulb holder, and swap the globe like-for-like. Avoid touching glass with bare fingers, oils shorten bulb life. If corrosion is present, clean the contacts and consider a dab of dielectric grease. Refit carefully so the foam seal sits flat to keep water out. When one bulb blows, replacing in pairs helps keep brightness balanced.
Maintenance tips that pay off:
- Keep lenses clean with car shampoo, not harsh solvents
- Periodically check the earth (ground) points for corrosion
- If moisture appears, reseal the housing or replace the gasket, persistent leaks usually mean the lamp needs replacement
- If considering LED retrofit bulbs, only use ADR/UNECE-compliant parts and confirm they work with the Navara’s wiring without causing glare or colour issues
Popular questions
What bulb type fits the 2002 Navara tail/stop light?
The 2002 Navara commonly uses a dual-filament globe for combined tail and stop functions, with separate indicators and reverse lamps. Bulb specifications can vary by market and trim, so it’s best to match what’s fitted or check the vehicle handbook or the marking on the old globe before purchase.
Are LED tail-light bulbs legal on a 2002 Navara in Australia and New Zealand?
They can be, provided the replacement parts are compliant with local rules (ADR in Australia, NZTA requirements in New Zealand), maintain correct red colour, brightness, and beam pattern, and don’t trigger electrical faults. If upgrading, choose compliant products and test operation with the park lights and brakes before driving.
Why do tail-lights get condensation, and is it a fail?
Minor misting after rain or washing can happen due to temperature changes and may clear on its own. Pools of water or persistent condensation point to a compromised seal, cracked lens, or vent issue. That can lead to bulb failure and may not pass a WOF or roadworthy, so repair or replacement is recommended.