Your Selected Vehicle
Parts for your 2002 Mitsubishi Lancer-Headlight bulbs
LED Autolamps 12/24V Front End Outline Marker Recessed Fitting Twin Blister - 7922WM2
LED Autolamps 10/30V Chrome Series LED Red Amber Side Marker With 40cm Wire - 35CCARM
LED Autolamps Twin function front position with supplementary front indicator - 97WIMCSB
LED Autolamps Twin function front position with supplementary front indicator - 97WIMB
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
Explore 4WD & Adventure
LED Autolamps 12/24V Side Marker Amber Lens Coloured LEDs Stainless Steel Bezel - 86AAM
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
LED Autolamps Traffic Advisory Light Green LED 12v Only Green Lens 10cm Cable Boxed - 83G
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps 12/24V Reverse Lamp Horizontal/Vertical Mount Twin Blister - 11WM-2
LED Autolamps 12V LED Stop/Tail/Indicator Assembly Light With Black Bracket - 80BAR
2002 Mitsubishi Lancer headlight bulbs — what they do and how to look after them
Headlight bulbs are absolutely relevant to the 2002 Mitsubishi Lancer. Factory documentation for the AU/NZ CH/CG-series Lancer (owner’s handbook and workshop manual headlamp section), along with major bulb catalogues from brands like Narva, Philips and Hella, list replaceable halogen headlight bulbs for this model. Most Australian and New Zealand–delivered 2002 Lancers use an H4 60/55W halogen bulb for combined low and high beam, with optional fog lamps typically using H3 55W. Always confirm against the specific vehicle’s handbook or parts label, as trims can vary.
The headlight bulbs do the heavy lifting for night and low-visibility driving, making sure the Lancer stays seen and can see the road ahead while meeting local ADR/WoF requirements. Over time, halogens dim and shift colour, so swapping tired bulbs can make a surprisingly big difference to night-time confidence.
For routine servicing, it’s smart to check brightness, colour and beam aim. Replace bulbs in pairs to keep light output even left to right. If going for an “upgraded” halogen, stick to ADR-compliant 60/55W options and avoid over-wattage units that can cook wiring or housings.
- Park safely, switch off, pop the bonnet, and let things cool.
- Reach the back of the headlamp, unplug the 3-pin connector.
- Peel off the rubber dust cover.
- Release the spring clip and withdraw the old H4 bulb.
- Fit the new bulb without touching the glass (use gloves or the box). Align the locating tabs.
- Refit the clip, dust cover and connector, then test both low and high beam. Check beam aim on a flat surface.
Maintenance tips: Keep lenses clean with plastic-safe cleaner. If lenses are yellowed, a restoration kit can restore clarity. Any moisture inside the lamp needs fixing—replace seals or the dust cover. Check earth points and connectors for corrosion, and make sure the headlight aim meets local regs after any front-end work.
A quick note on variants: while AU/NZ Lancers of this year commonly run H4, other markets sometimes use different fitments (e.g., HB5/9007). When in doubt, check the glovebox manual or a reputable parts catalogue for the exact VIN.
Popular questions about 2002 Mitsubishi Lancer headlight bulbs
What bulb type fits a 2002 Mitsubishi Lancer?
Most Australian and New Zealand CH/CG 2002 Lancers use an H4 60/55W halogen for low/high beam, and H3 55W for factory fogs. Some overseas models differ (e.g., 9007/HB5), so it’s worth confirming against the handbook or a trusted bulb guide for the specific trim.
Are LED or HID conversions legal on a 2002 Lancer?
LED and HID retrofit kits in halogen reflector housings are often not road-legal without approved lamps and proper certification. To stay compliant with ADR/WoF, use ADR-approved halogen replacements or complete, approved headlamp assemblies designed for LED/HID where permitted.
Why replace headlight bulbs in pairs?
Halogens dim as they age. If one fails, the mate is usually not far behind and will be noticeably duller. Replacing both maintains even brightness and beam colour, improving night driving and keeping the car looking tidy and balanced.