Parts for your 2002 Ford Ranger-Brake shoes

2002 Ford Ranger Brake Shoes — What They Do and When to Replace Them

Per the Ford 2002 Ranger Workshop Manual (Section 206-03: Rear Drum Brake) and the 2002 Ranger Owner’s Guide, this model runs front disc brakes and rear drum brakes. That means it absolutely uses rear brake shoes. Parts catalogues for the 2002 Ranger (e.g., Motorcraft and major aftermarket listings) also specify rear brake shoe sets in 9-inch or 10-inch drum sizes depending on axle/GVW, backing up the factory documentation.

On a 2002 Ford Ranger, the rear brake shoes are curved friction linings that press outward against the inside of the brake drum to slow the ute and hold it steady at a stop. They also team up with the handbrake/park brake mechanism, so good shoes help with confident hill holds and trailer work. While they’re tucked away, they do plenty of heavy lifting, sharing braking with the front discs and managing stability when loaded.

As part of regular servicing, it’s smart to have the rear drums pulled for a proper look at the shoes, hardware, cylinders and adjusters. Shoes should be replaced when the friction material is worn thin, contaminated by brake fluid or grease, heat-cracked, or uneven. A technician will also measure drum inside diameter against the maximum spec cast into the drum