Your Selected Vehicle
Parts for your 2002 Daihatsu Yrv-Headlight bulbs
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Explore 4WD & Adventure
LED Autolamps 174 Series Reverse Lamp 12/24V, Surface Mount, 40cm Cable - 174WMB
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps 12V Stop/Tail Lamp Black Chrome Round With Clear Lens - 102RBC
LED Autolamps 10/30V LED Side Direction Indicator Light With 30cm Wire - 35AMB
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
LED Autolamps Licence Plate Lamp Black Bracket Multi Volt With 1m Cable - 35BLM1P
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack - 12WM-2
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
2002 Daihatsu YRV headlight bulbs — purpose, fitment, and easy servicing tips
Based on technical references including Daihatsu service information for the M2 platform (Storia/Sirion/YRV) and major bulb catalogues from Osram, Philips, and Narva Australia, the 2002 Daihatsu YRV uses replaceable halogen headlight bulbs, most commonly the H4 (60/55W) dual‑filament type. That means headlight bulbs are absolutely relevant and serviceable items on this model.
The headlight bulbs on a 2002 Daihatsu YRV do the heavy lifting for safe night-time and low‑visibility driving, providing both low beam for regular traffic and high beam for open‑road visibility. On most YRVs, a single H4 bulb in each headlamp handles both beams via two filaments. Keeping these bulbs fresh and correctly aimed isn’t just nice to have — it’s essential for complying with local roadworthy and WOF standards across Australia and New Zealand.
For servicing, the YRV is friendly to DIYers. Access is from the back of the headlamp: unplug the three‑pin connector, peel off the rubber dust cap, release the spring clip, and withdraw the bulb. When refitting, avoid touching the glass, skin oils can shorten bulb life. Line up the locating tabs so the bulb sits flush, clip it in, refit the cap, and plug the connector back on. It’s smart practice to replace bulbs in pairs so beam colour and brightness match side to side.
Owners should stick with the standard 60/55W rating. Higher‑wattage bulbs can overheat the reflector or wiring and may not be legal. If a brighter look is wanted, choose quality +performance halogen options that meet ADR and NZTA requirements. After installation, check aim on level ground — a poorly aimed lamp can dazzle oncoming traffic or leave the kerbside in the dark.
As part of routine servicing:
- Inspect bulb operation and lens clarity every 10,000–15,000 km.
- Check for moisture inside the housing — replace seals or dust caps if needed.
- Examine the connector for heat discolouration, clean earth points if beams flicker.
- If bulbs fail frequently, test charging voltage (target ~13.8–14.5 V with engine running).
A tidy headlight setup on the YRV makes night drives easier on the eyes, keeps the car legal, and helps everyone get home safely.
Popular questions about 2002 Daihatsu YRV headlight bulbs
What bulb type fits the 2002 Daihatsu YRV?
The common fitment is H4 60/55W halogen, covering both low and high beam in one globe. As trims and markets can vary, it’s wise to confirm against the owner’s manual, a reputable bulb catalogue, or the existing bulb’s markings before purchase.
Can the YRV be upgraded to LED headlight bulbs?
LED retrofit kits exist, but legality and beam pattern are the big considerations. Many LEDs won’t project correctly in a halogen reflector and may not meet ADR/NZ road standards. If choosing LED, pick a compliant kit designed for H4 reflectors and have the beam aim checked professionally.
Why do my YRV headlight bulbs keep blowing?
Frequent failures usually point to vibration, high charging voltage, poor earths, or touching the glass during install. Check the alternator output, make sure the dust cap seals properly to keep moisture out, and replace worn connectors that run hot.