Parts for your 2001 Mitsubishi Pajero-Oil cap

2001 Mitsubishi Pajero oil cap — what it does and how to look after it

Technical references confirm the 2001 Mitsubishi Pajero is definitely fitted with an engine oil filler cap, making the part relevant for every petrol and diesel variant of that year. The Pajero/Montero Workshop Manual (NM/NP series, 2000–2002), Group 11A Engine Lubrication and Group 13A Diesel (4M41), illustrates and specifies the oil filler cap on the rocker/valve cover. The Mitsubishi ASA Electronic Parts Catalogue (EPC) for the same series also lists the component under “COVER, OIL FILLER” for the 6G74 petrol V6 and 4M41 3.2 Di‑D diesel engines.

On this Pajero, the oil cap is the simple, twist-on lid on the top of the engine’s rocker cover. It seals the filler neck, keeping dust and moisture out of the sump while preventing oil mist from escaping under the bonnet. It also helps the crankcase ventilation system do its job properly. If the cap’s missing or its seal is shot, expect oil weep, a burnt-oil whiff, and on the petrol V6 possibly a rough idle from unmetered air sneaking in.

As part of regular servicing (every 10,000–15,000 kilometres or six months, typical for local schedules), the cap deserves a quick once-over. Look for a hard, flattened, or cracked rubber seal, damaged tabs, or threads that don’t bite smoothly. Wipe dust and grit away before removing the cap so nothing falls inside, then refit it hand-tight until it seats—no spanner required. A light film of fresh oil on the seal can help it seat and unseat cleanly.

Replacement is cheap insurance. If the seal has gone crusty, if there’s oil dampness around the filler after a drive, or if the cap no longer locks on positively, swap it. Choose a cap specified for the 2001 Pajero’s engine (petrol 6G74 V6 or 4M41 diesel), as bayonet styles and seal depths can differ. Genuine or a quality aftermarket equivalent both work well