Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 2000 Toyota Crown-Brake calipers

Sort by
Repco Caliper Piston Cube Wind Tool - RST150

Repco Caliper Piston Cube Wind Tool - RST150

$22
Fitment Notes:
See More
Repco Ratcheting Brake Pad Spreader - RST225

Repco Ratcheting Brake Pad Spreader - RST225

$108
Fitment Notes:
See More
T&E Tools Brake Caliper Press Spreader - 2059

T&E Tools Brake Caliper Press Spreader - 2059

$127
Fitment Notes:
See More
T&E Tools 27 Pc Disc Brake Caliper Wind Back Kit

T&E Tools 27 Pc Disc Brake Caliper Wind Back Kit

$519
Fitment Notes:
See More
Toledo Disc Pad Spreader - 310265

Toledo Disc Pad Spreader - 310265

$28
Fitment Notes:
See More
Repco Brake Bleeder Kit 6pc - RST185

Repco Brake Bleeder Kit 6pc - RST185

$173
Fitment Notes:
See More
Toledo Ratcheting Brake Caliper Press - 310377

Toledo Ratcheting Brake Caliper Press - 310377

$144
Fitment Notes:
See More

Explore 4WD & Adventure

Repco Disc Brake Pistol Tool - RST199

Repco Disc Brake Pistol Tool - RST199

$22
Fitment Notes:
See More
Brake Cylinder Hone 22-63mm - RST200-1

Brake Cylinder Hone 22-63mm - RST200-1

$30
Fitment Notes:
See More
Toledo Rear Disc Brake Piston Cube - 310269

Toledo Rear Disc Brake Piston Cube - 310269

$24
Fitment Notes:
See More
Toledo Brake Cylinder Hone Med 25-64mm - 301046

Toledo Brake Cylinder Hone Med 25-64mm - 301046

$34
Fitment Notes:
See More
Toledo Brake Piston Wind Back Kit - 310375

Toledo Brake Piston Wind Back Kit - 310375

$744
Fitment Notes:
See More
Showing 1 - 13 of 13 products

Maintaining and Replacing Brake Calipers on Your 2000 Toyota Crown

The brake calipers on your 2000 Toyota Crown play a critical role in the vehicle's braking system. They are responsible for squeezing the brake pads against the rotor to slow down or stop the car. Without properly functioning calipers, your vehicle's braking performance would be significantly compromised, affecting safety and handling. Regular maintenance and timely replacement of these components are crucial for optimal performance and safety.

  1. Signs of Worn-Out Brake Calipers
    • Unusual squeaking or grinding noises when braking.
    • Vibration or wobbling during braking.
    • Increased stopping distance.
    • Uneven wear on brake pads.
  2. Importance of Regular Inspection

    Regular inspections should include checking for any visible damage or unusual wear on the calipers. Look for signs of leaking brake fluid which could indicate a damaged seal or hose. Any visible rust or corrosion should also be addressed as it can affect the performance of the calipers.

  3. Replacing Brake Calipers

    If you find that your brake calipers need replacing, it's a wise decision to have them checked and replaced by an experienced technician. This not only ensures that the new calipers are installed correctly but also provides an opportunity to inspect the entire braking system.

    During replacement, the following steps are typically followed:

    1. Removal: The wheel and brake pads are removed to access the caliper bolts. The hydraulic line is then disconnected from the old caliper.
    2. Installation: The new caliper is fitted, ensuring all bolts are securely fastened and the hydraulic line is properly reattached to prevent leaks.
    3. Bleeding the Brake System: This step is crucial to remove any air that may have entered the brake lines during the installation process.
    4. Testing: Finally, the braking system is tested to ensure everything functions well and the brake pedal feels firm.

Maintaining the brake calipers is part and parcel of proper brake care. Adopting a regular service schedule helps avoid unnecessary wear and potential failures. It's always best to address any braking issues as soon as they arise, keeping your vehicle safe and sound on the road.