Your Selected Vehicle
Parts for your 2000 Toyota Avensis-Tail lights
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2000 Toyota Avensis
When it comes to vehicle maintenance, the tail lights on your 2000 Toyota Avensis often don't get the attention they deserve. However, they're an essential component that ensures your safety on the road. Not only do they allow you to communicate with other drivers, but they also enhance visibility, especially in low light conditions.
If you've noticed that one or both of your tail lights aren't functioning correctly, it's time to consider a replacement. Before diving into the specifics, let's go over some practical steps involved in replacing or maintaining the tail lights on your Avensis.
- First, assess the situation:
- If just one tail light has stopped working, chances are it's just a blown bulb. However, if both are out, it might be a fuse or wiring issue.
- Check for any visible damage to the tail light casing including cracks or water ingress, as these can lead to further problems down the line.
- Collect the necessary tools and replacement parts:
- A basic toolkit including screwdrivers and pliers.
- The correct bulb type for your 2000 Toyota Avensis, as specified in your vehicle's manual.
- If replacing the entire tail light assembly, ensure you have a compatible part that meets OEM specifications.
- Replacing the tail light bulb:
- Open the boot to access the back of the tail light assembly.
- Locate and unscrew the retaining screws or clips. Slide out the assembly gently.
- Twist the bulb holder to remove it from the assembly. Pull the faulty bulb straight out and replace it with a new one, being careful to avoid touching the glass with bare hands.
- Reassemble everything in reverse order and test the new bulb.
- If you need to replace the entire assembly:
- You'll need to fully unbolt the old unit, disconnect the wiring harness, and attach the new assembly carefully.
- Ensure all screws are tightened and the wiring connections are secure to prevent future issues.
Regular maintenance and checks of your tail lights are crucial for ensuring ongoing safety and compliance with road regulations. It's always a good idea to periodically check the functionality of your vehicle's lights and address any issues promptly. A well-functioning lighting system is vital not only for communicating your actions to other drivers but also for illuminating the road behind you, keeping you and your passengers safe during every journey.
Remember, if you're unsure about tackling this task on your own, it's always best to consult with a professional mechanic or visit a reputable auto service centre. They can provide guidance and expertise, ensuring that your 2000 Toyota Avensis remains roadworthy and safe at all times.