Your Selected Vehicle
Parts for your 2000 Toyota Avensis-Tail lights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2000 Toyota Avensis
When it comes to vehicle maintenance, the tail lights on your 2000 Toyota Avensis often don't get the attention they deserve. However, they're an essential component that ensures your safety on the road. Not only do they allow you to communicate with other drivers, but they also enhance visibility, especially in low light conditions.
If you've noticed that one or both of your tail lights aren't functioning correctly, it's time to consider a replacement. Before diving into the specifics, let's go over some practical steps involved in replacing or maintaining the tail lights on your Avensis.
- First, assess the situation:
- If just one tail light has stopped working, chances are it's just a blown bulb. However, if both are out, it might be a fuse or wiring issue.
- Check for any visible damage to the tail light casing including cracks or water ingress, as these can lead to further problems down the line.
- Collect the necessary tools and replacement parts:
- A basic toolkit including screwdrivers and pliers.
- The correct bulb type for your 2000 Toyota Avensis, as specified in your vehicle's manual.
- If replacing the entire tail light assembly, ensure you have a compatible part that meets OEM specifications.
- Replacing the tail light bulb:
- Open the boot to access the back of the tail light assembly.
- Locate and unscrew the retaining screws or clips. Slide out the assembly gently.
- Twist the bulb holder to remove it from the assembly. Pull the faulty bulb straight out and replace it with a new one, being careful to avoid touching the glass with bare hands.
- Reassemble everything in reverse order and test the new bulb.
- If you need to replace the entire assembly:
- You'll need to fully unbolt the old unit, disconnect the wiring harness, and attach the new assembly carefully.
- Ensure all screws are tightened and the wiring connections are secure to prevent future issues.
Regular maintenance and checks of your tail lights are crucial for ensuring ongoing safety and compliance with road regulations. It's always a good idea to periodically check the functionality of your vehicle's lights and address any issues promptly. A well-functioning lighting system is vital not only for communicating your actions to other drivers but also for illuminating the road behind you, keeping you and your passengers safe during every journey.
Remember, if you're unsure about tackling this task on your own, it's always best to consult with a professional mechanic or visit a reputable auto service centre. They can provide guidance and expertise, ensuring that your 2000 Toyota Avensis remains roadworthy and safe at all times.