Parts for your 2000 Nissan Pulsar-Pedal pads

2000 Nissan Pulsar Pedal Pads

Pedal pads are absolutely relevant to the 2000 Nissan Pulsar. Technical references including the Nissan Factory Service Manual (FSM) for N15/N16 models and Nissan’s FAST electronic parts catalogue show a moulded rubber pad fitted to the brake pedal on all variants, and to the clutch pedal on manual models. The accelerator pedal is typically a moulded plastic/metal assembly without a separate rubber pad, but the term “pedal pads” commonly refers to the replaceable brake and clutch rubber covers.

On a 2000 Pulsar, those rubber pads do a simple but critical job: they provide grippy, vibration-damping contact so the driver’s foot doesn’t slip, especially in wet weather. With age, the pads harden, glaze and crack. Once they’re smooth or torn, stopping distances can blow out due to foot slip, and it can even cop a WOF/RWC defect in NZ or Australia.

As part of routine servicing, it’s smart to inspect the pedal pads every 10,000–15,000 km or annually. Replacement is inexpensive and quick—well within a DIYer’s reach—and should be done at the first signs of wear.

• Tell-tale wear signs: shiny/smooth surface, rounded edges, visible splits, pad slipping off the metal pedal, or your shoe slipping when damp.
• Legal/roadworthy: severely worn pads can be flagged at inspection