Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 1999 Toyota Echo|yaris-Coolant

Sort by
T&E Tools Coolant Evacuator and System Tester

T&E Tools Coolant Evacuator and System Tester

$278
Fitment Notes:
See More
Repco 12 Pc Coolant Funnel Set - RST241

Repco 12 Pc Coolant Funnel Set - RST241

$149
Fitment Notes:
See More
Toledo Coolant Filler Funnel Set - 305092

Toledo Coolant Filler Funnel Set - 305092

$224
Fitment Notes:
See More
Repco Radiator Cooling System Kit - RTT1019

Repco Radiator Cooling System Kit - RTT1019

$906
Fitment Notes:
See More
Repco Oil Extractor 6L - ROE6L

Repco Oil Extractor 6L - ROE6L

$253
Fitment Notes:
See More
Gates Hose Cutter up to 3in ID - 91143

Gates Hose Cutter up to 3in ID - 91143

$213
Fitment Notes:
See More
Toledo Thermometer 0-220 Deg Farenheit - 308002

Toledo Thermometer 0-220 Deg Farenheit - 308002

$36
Fitment Notes:
See More

Explore 4WD & Adventure

Showing 1 - 7 of 7 products

1999 Toyota Echo/Yaris Coolant Maintenance and Replacement

Your 1999 Toyota Echo, also commonly referred to as the Yaris in some markets, relies significantly on its cooling system to maintain optimal engine performance. The coolant plays a crucial role in this system by regulating the engine temperature, preventing it from overheating, and protecting it from corrosion. Regular maintenance and replacement of the coolant are essential to ensure the long life and efficiency of your vehicle.

Here are the steps and key considerations when attending to your Toyota Echo/Yaris coolant:

  1. Purchase the right coolant: Always ensure you're using the correct type of coolant for your 1999 Toyota Echo/Yaris. The recommended one is usually Toyota's long-life red or pink antifreeze, but refer to your owner's manual or consult a professional for confirmation.
  2. Preparation and safety: Before commencing any work on your vehicle's cooling system, make sure the engine is off and completely cooled down to avoid burns or injuries. Use protective gear like gloves and goggles to ensure safety.
  3. Draining the old coolant: Position a drain pan beneath the radiator drain plug. Slowly unscrew the plug and allow the old coolant to completely drain out. This step may take several minutes, but it's important to ensure that the system is empty of the old fluid.
  4. Flushing the system: Once the old coolant is drained, it's advisable to flush the cooling system to remove any residue or deposits. Fill the system with a coolant flush solution or clean water and run the engine briefly to circulate it through the system. Then drain this out as well.
  5. Refilling with new coolant: With the system flushed, it's time to add the new coolant. Mix the new coolant with water as recommended, and slowly add it to the radiator. Be sure to use a proper funnel to prevent spillage and air pockets. Once the radiator is filled, run the engine for a few minutes with the heater on high to circulate the coolant and remove any air locks.
  6. Check for leaks and top-up: Turn off the engine and inspect the system for any potential leaks. Top-up with additional coolant if necessary and replace the radiator cap securely.

Regular checks and top-ups: Remember to periodically inspect the coolant level in the radiator and overflow tank. A quick visual check can be done when the engine is cool, topping up as needed. Keep an eye out for any signs of leaks or discoloured coolant, which could indicate other issues requiring a professional's attention.

Replacing and maintaining the coolant in your 1999 Toyota Echo/Yaris is a straightforward process that contributes significantly to your vehicle's reliability and safety. Regular servicing ensures that your car remains in top condition, providing peace of mind and ensuring that your Echo/Yaris runs smoothly for years to come.