Parts for your 1999 Toyota Altezza-Wheel hubs

1999 Toyota Altezza Wheel Hubs

Technical sources confirm wheel hubs are absolutely relevant and fitted to the 1999 Toyota Altezza (XE10). Toyota’s Electronic Parts Catalogue (EPC) for the XE10 platform lists dedicated front and rear wheel hub and bearing sub‑assemblies, and the factory repair manual for the Altezza/Lexus IS200 details hub and bearing service procedures, including the ABS encoder arrangement and wheel stud fitment. Independent bearing catalogues from major OE suppliers used by Toyota also describe sealed hub/bearing units for this chassis. So yes—this model runs conventional wheel hubs front and rear.

On the 1999 Toyota Altezza, the wheel hub is the solid foundation that the wheel bolts to via the studs. It carries the sealed bearing that lets the wheel spin smoothly, keeps the brake rotor centred, and provides the encoder surface the ABS sensor reads. Up front, the bearing is pressed into the steering knuckle with the hub flange running through it