Parts for your 1999 Nissan Pulsar-Wiper blades

1999 Nissan Pulsar wiper-blades: fitment, purpose, and easy servicing tips

Per Nissan’s 1999 Pulsar N15 owner’s and service manuals, and major aftermarket fitment catalogues for that model year, the vehicle is equipped with front windscreen wiper blades, and most hatchback variants also include a rear wiper. So wiper-blades are absolutely relevant to the 1999 Nissan Pulsar.

On a 1999 Pulsar, the wiper-blades do the simple but critical job of clearing rain, road grime, and bug splatter from the windscreen so the driver can see clearly in all conditions. Effective wipers aren’t just a nice-to-have, they’re essential for safety and can be a roadworthy/WOF item in Australia and New Zealand. When the rubber hardens, cracks, or starts to chatter, the blades can leave streaks, judder across the glass, and seriously reduce visibility—especially at night when glare is amplified.

For owners keeping their Pulsar in top nick, it’s smart to treat wiper-blades like a regular service item. In Aussie and Kiwi conditions—strong UV, salty coastal air, and big temperature swings—rubber can age quickly. A good rule is to inspect every service and replace roughly every 6–12 months, or sooner if there’s streaking, squeaking, or the edge feels nicked or brittle. Cleaning the rubber with a damp cloth during a wash helps, and so does topping up with proper windscreen washer fluid rather than plain water.

• Check the driver, passenger, and (if fitted) rear blade for cracks, missing chunks, or bent frames.
• Don’t run the wipers on a dry windscreen—use the washer first to reduce wear.
• Choose a quality replacement that matches the correct length and fitting style for the Pulsar’s arms, beam or hybrid blades can reduce chatter and wind lift.
• If the blade is fine but streaks persist, inspect the windscreen for wax or silicone residue and clean with a dedicated glass cleaner.
• During a service, also check the wiper arm spring tension and aim of the washer jets so the spray actually hits the wipe zone.

Whether it’s a quick DIY swap or part of a regular service, fresh wiper-blades keep the 1999 Nissan Pulsar safer and easier to drive when the weather turns. That’s exactly what Nissan’s manuals and industry parts guides expect for this model.

Popular questions

What type of wiper-blades fit a 1999 Nissan Pulsar?
Most 1999 Pulsar (N15) models use conventional hook-style front fittings, and hatchbacks typically have a specific rear blade. The exact lengths vary by body style and market, so it’s best to match by vehicle look-up or measure what’s on the car. Many owners prefer modern beam or hybrid blades for quieter, streak-free wiping, provided the fitting and lengths are correct.

How often should wiper-blades be replaced on a 1999 Pulsar?
In Australian and New Zealand conditions, plan on every 6–12 months. Strong UV and coastal air can age rubber fast. Replace sooner if there’s streaking, squeaking, or if the rubber edge looks cracked or ragged. A quick wipe of the rubber with a damp cloth during washes can stretch the lifespan a bit.

Does the 1999 Pulsar hatch have a rear wiper, and should it be replaced too?
Yes, most hatchback variants are fitted with a rear wiper. It’s just as important as the fronts for reversing in rain or clearing road grime. Inspect and replace it on the same schedule as the front pair, and make sure the rear washer jet is spraying properly.