Your Selected Vehicle
Parts for your 1999 Daihatsu Terios-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 1999 Daihatsu Terios
Tail lights are a crucial safety component of your 1999 Daihatsu Terios, ensuring visibility to other drivers during night-time driving or in low-visibility conditions. Regular maintenance and timely replacement of these components not only keep you compliant with road safety standards but also enhance the overall aesthetics of your vehicle.
Tackling a tail light replacement on a vehicle such as the Terios is generally straightforward, but there are a few key steps and tips that can make the process smoother. Here's a general guide to help you through it:
- Gather Tools and Supplies: Before starting, make sure you have the necessary tools. A screwdriver set, replacement bulbs or assemblies as needed, and perhaps a pair of gloves to keep your hands clean and protect the bulbs from oils are essential.
- Access the Tail Light Assembly: Open the boot and locate the access panel for the tail lights. Depending on your specific Terios setup, you may need to remove screws or clips to detach the light housing.
- Inspect and Remove the Old Bulb: Once you've accessed the tail light assembly, gently twist and pull out the bulb socket from the housing. Inspect the bulb closely for any signs of filament breakage or cloudiness. Even if it's just one bulb that's out, consider replacing bulbs in pairs for consistent brightness.
- Install the New Bulb: Carefully fit the new bulb into the socket, making sure it's secure and positioned correctly. Reattach the socket into the tail light assembly. Before sealing everything back up, test the new light to ensure it's working properly.
- Secure the Assembly: Once satisfied, reattach the tail light assembly and ensure all fasteners are tightened securely to prevent any rattling or movement.
While addressing tail light issues, consider a broad visual inspection of your vehicle's lighting system. Confirm all bulbs associated with tail lights, including brake lights and indicators, are operational. Consistent functioning of all lights aids in preventing discrepancies that might lead to accidents or fines.
For those not comfortable with vehicle maintenance, or if time is limited, professional automotive technicians can handle tail light replacements as part of regular servicing. This approach not only ensures the job is done correctly but also allows mechanics to spot other potential issues early.
Keeping your Daihatsu Terios in top shape involves not just engine and mechanical maintenance but also paying attention to small yet pivotal components like tail lights. Regular checks and prompt replacements ensure a safe driving experience, reflecting your care for both your vehicle and other road users.