Your Selected Vehicle
Parts for your 1998 Toyota Crown-Headlights
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Explore 4WD & Adventure
Narva Crimp Terminal Male Blade Red Terminal Entry 6.3 x 0.8mm Heat Shrinkable 20 Pce - 56320BL
1998 Toyota Crown headlights: purpose, care and replacement
Headlights are absolutely relevant and factory-fitted on the 1998 Toyota Crown. This is confirmed by Toyota service and body-electrical manuals for the S150-series Crown (lighting section), Toyota’s Electronic Parts Catalogue listings for headlamp assemblies and bulbs, and statutory lighting requirements such as Japan’s Safety Regulations for Road Vehicles and Australian Design Rules ADR 13/00 and ADR 46/00 covering headlamp installation and performance. Some trims of the late-’90s Crown were supplied with halogen reflector lamps, while certain Japan‑market grades offered discharge (HID) units.
The 1998 Toyota Crown’s headlights do the heavy lifting after dark: projecting a clear, legal beam pattern so the driver sees hazards early without dazzling others. On low beam they provide a flat, controlled cut-off for city and highway use
