Your Selected Vehicle
Parts for your 1998 Suzuki Vitara-Headlight bulbs
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIMB
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
Explore 4WD & Adventure
LED Autolamps Twin function side indicator with amber side marker - 97AIMCSB
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
LED Autolamps 12/24V Stop/Tail Lamp With Reflector 14 LEDs Blister Package - 130RMG
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
LED Autolamps 12/24V Stop/Tail Lamp 49 LEDs With Bracket And 30cm Wire - 100RM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
1998 Suzuki Vitara headlight-bulbs: purpose, care, and replacement
Headlight-bulbs are absolutely fitted to the 1998 Suzuki Vitara. Technical sources including the Suzuki Vitara/Sidekick Service Manual (Lighting System), the 1998 model Owner’s Manual, and the OEM parts catalogue specify an H4 (HB2/9003) 12V 60/55W halogen bulb with a P43t base for the main headlamps. That means this Vitara relies on a replaceable dual‑filament halogen bulb for both low and high beam.
On a 1998 Vitara, the headlight-bulbs do the heavy lifting after dark—providing a clean, legal beam pattern for seeing the road and being seen by others. When they age, output can drop noticeably, turning night drives into guesswork. Fresh bulbs restore confidence, keep things roadworthy under ADR and WOF checks, and help avoid eye-strain on longer kilometres.
When it’s time for servicing, headlight-bulbs deserve a look. Many owners replace them in pairs so the colour and brightness match. If the lights are dim, flickering, or one side has failed, that’s the cue. It’s also smart to inspect the headlamp lenses, if they’re hazy, a quick polish can unlock heaps of lost light even after new bulbs go in.
- Open the bonnet and remove the rear dust cap on the headlamp.
- Unplug the 3‑pin connector and release the spring clip.
- Swap in a new H4 12V 60/55W halogen bulb—avoid touching the glass, use gloves or a tissue.
- Refit the clip, connector, and cap, then check both beams.
- Verify headlight aim to avoid dazzling oncoming traffic and to pass rego/WOF.
Good practice includes checking fuses and the headlamp earths if a new bulb doesn’t light. If upgrading to a higher‑output halogen, stay within the rated wattage to protect the wiring and switches. LED retrofit bulbs might not meet beam pattern or compliance requirements in the Vitara’s halogen reflector, always confirm local rules before fitting and have the aim checked after any change.
- Replace every few years or at the first sign of dimming.
- Keep a spare H4 bulb in the glovebox for road trips.
- Clean lenses and ensure the rubber caps seal properly to keep moisture out.
What bulb type fits a 1998 Suzuki Vitara headlight?
The 1998 Vitara uses an H4 (HB2/9003) halogen bulb, 12V 60/55W with a P43t base, as specified in Suzuki’s service and owner documentation. It’s a dual‑filament bulb covering both low and high beam in one unit.
How often should headlight-bulbs be replaced?
There’s no strict interval, but many bulbs lose brightness well before they fail. Replacing every 2–4 years, or when you notice dimming, keeps output up. Swapping both sides together helps keep beam colour and brightness even.
Can a 1998 Vitara be upgraded to LED headlight-bulbs?
While LED retrofits exist, the Vitara’s reflector was designed for halogen. Some LED kits can produce glare or a poor beam pattern and may not meet ADR/WOF requirements. If considering LEDs, check local rules and have the beam aim professionally verified.