Parts for your 1998 Mitsubishi Pajero-Headlight bulbs

1998 Mitsubishi Pajero Headlight Bulbs

Headlight bulbs are absolutely used on the 1998 Mitsubishi Pajero. Technical sources including the Mitsubishi Pajero workshop manual for the late-’90s models (lighting section) and OEM parts catalogues specify replaceable halogen headlamp bulbs—most commonly H4 (also labelled HB2/9003) at 12V 60/55W. Major aftermarket bulb fitment guides for this generation back that up. Depending on trim or market, some Pajeros run the dual‑filament H4 for both low and high beam in a single reflector, while others may pair a low‑beam halogen with a separate high‑beam bulb. Either way, they’re serviceable items and part of routine maintenance.

The purpose of the headlight bulbs is straightforward: deliver reliable, ADR/NZTA‑compliant low and high beam so the Pajero can see and be seen—on backroads, worksites, or the school run. As halogens age, output drops and colour shifts yellow, so replacing tired bulbs sharpens night vision and reduces fatigue.

For servicing, it’s smart to replace bulbs in pairs to keep beam colour and brightness even. Stick to the specified wattage—higher‑wattage globes can overheat wiring and housings. If a bulb keeps blowing, it’s worth checking the earths, headlight relay, and the condition of the connectors. Cloudy lenses or moisture in the housing will also sap performance, restore the lens and reseal the dust cover if needed.

1. Switch ignition off, let the lamps cool, and pop the bonnet.
2. Unclip and remove the rubber dust cover behind the headlamp.
3. Unplug the 3‑pin connector from the bulb.
4. Release the spring clip, then withdraw the bulb.
5. Fit the new H4 bulb, aligning the tabs—avoid touching the glass, use gloves or a clean tissue.
6. Refit the clip, connector, and dust cover. Test both beams and check aim, especially after suspension work or towing.

For a modest performance lift, quality +130% halogen bulbs can brighten the beam without changing wattage, keeping things legal. LED or HID conversions in halogen housings can create glare and may not comply with ADR/NZTA unless using approved assemblies—so best avoided unless certified.

Backed by Mitsubishi’s documentation and widely accepted bulb catalogues for the 1998 Pajero, keeping fresh, correct‑spec halogen bulbs on board is simple, safe, and makes night driving far easier.

Popular questions

What headlight bulb type does a 1998 Mitsubishi Pajero use?
Most 1998 Pajeros use H4 (HB2/9003) 12V 60/55W halogen bulbs for combined low/high beam. Some variants have a separate high‑beam bulb. Best bet is to confirm against the owner’s manual or the label behind the headlamp dust cover.

How often should the headlight bulbs be replaced?
Replace them when output looks dim, the beam goes patchy or yellow, or one fails. Halogen performance typically tails off after 2–3 years of regular use, so proactive pair replacement keeps brightness even and visibility up.

Can LED bulbs be fitted instead of halogens?
Not recommended in the original halogen housings. Retrofit LEDs can cause glare and may not meet ADR/NZTA requirements. If brighter light is needed, choose premium halogen upgrades of the correct wattage, or look into approved headlamp assemblies.