Your Selected Vehicle
Parts for your 1998 Daihatsu Gran move-Batteries
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail Lamp With Reflector 14 LEDs Blister Package - 130RMG
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIMB
LED Autolamps Red LED Stop/Tail Lamp Insert For J3 Series Blister Pack - J3RM
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
LED Autolamps 12/24V Stop/Tail Lamp 49 LEDs With Bracket And 30cm Wire - 100RM
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMCSB
1998 Daihatsu Gran Move batteries
The 1998 Daihatsu Gran Move (also known as the Pyzar in some markets) absolutely uses a 12‑volt starting battery. That’s clear from technical sources like the Daihatsu Gran Move/Pyzar workshop manual electrical section (charging and starting system diagrams show a 12 V battery and alternator circuit), the owner’s manual maintenance section (battery care and jump-start procedures), and Australian/NZ fitment catalogues from major brands such as Century Batteries and Yuasa that list direct-replacement batteries for this model. So yes—batteries are relevant and fitted to the 1998 Gran Move.
For this model, the battery’s job is to crank the 1.5-litre petrol engine, stabilise the electrical system, and keep accessories like lights, ECU, and the immobiliser ticking along. Once it’s running, the alternator charges the battery and runs the vehicle’s electrics. Without a healthy battery, cold starts get sluggish, voltage dips upset sensors, and the alternator works overtime to compensate.
When servicing a 1998 Gran Move, it’s worth giving the battery a quick once-over. Most cars of this era take a compact JIS-style battery with the positive on the left (common across late-90s Daihatsus), but always check the tray size, hold-down, and terminal orientation before buying. A quality maintenance-free unit with the right Cold Cranking Amps (CCA) and reserve capacity is the go—many owners aim for a CCA in the mid-300s to 400s for dependable starts in Aussie and Kiwi conditions.
Handy battery care tips for this Daihatsu:
- Test resting voltage (aim ~12.6 V fully charged) and charging voltage with the engine running (roughly 14.0–14.7 V).
- Keep terminals clean and tight, a dab of anti-corrosion spray or petroleum jelly helps.
- Check the tray and clamp for rust or looseness—movement shortens battery life.
- Replace at ~3–5 years, or sooner if cranking slows, lights dim at idle, or it fails a load test.
- Use a memory saver if you’re worried about presets, dispose of the old unit through proper recycling.
If the Gran Move sits for long spells, a smart charger or maintainer is cheap insurance against sulphation. And if jump-starting is needed, follow the manual’s sequence and polarity—getting that wrong can toast sensitive electronics.
Popular questions about 1998 Daihatsu Gran Move batteries
What battery size fits a 1998 Gran Move?
Most 1998 Gran Move examples use a compact JIS-style battery commonly seen as an NS60 footprint with left-hand positive. Exact fit can vary by tray and hold-down, so it’s smart to match the physical size, terminal layout, and choose a CCA in the mid-300s or higher for reliable starts. Checking a trusted ANZ battery fitment guide or measuring the tray avoids surprises.
How long should the battery last?
Typically 3–5 years in Australian and New Zealand conditions. Heat, short trips, and infrequent use shorten life. If cranking gets lazy, headlights pulse at idle, or the battery can’t hold ~12.6 V after charging, it’s time to test and likely replace.
Any tips when replacing the battery?
Confirm polarity and height before purchase, use a memory saver if you want to keep presets, clean the clamps, tighten them firmly (not gorilla-tight), and protect with anti-corrosion spray. After install, check charging voltage is around 14 V. Recycle the old battery responsibly.