Your Selected Vehicle
Parts for your 1997 Suzuki Jimny-Tail lights
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 1997 Suzuki Jimny
The 1997 Suzuki Jimny, a compact SUV known for its rugged reliability, relies significantly on clear and operational tail lights to ensure safety both in urban settings and off the beaten track. Tail lights are a crucial component of your vehicle's lighting system. They play a vital role in ensuring visibility to other drivers, especially in low-light conditions or at night. If you notice your tail lights are dimming or not functioning correctly, it's essential to address the issue promptly.
Tail light maintenance is relatively straightforward, but there are a few pointers to keep in mind for keeping them in good shape. First, regular inspections are key. Given the nature of an older vehicle like the 1997 Jimny, routine checks should be part of your maintenance regime. Inspect the lights to make sure there are no cracks or moisture build-up, which could indicate a compromised seal, potentially leading to electrical failures.
When it's time for a replacement, the process doesn't require professional help unless you're not comfortable tackling it yourself. Here's a step-by-step guide to replacing the tail lights on your 1997 Suzuki Jimny:
- Turn off your vehicle and ensure the lights are switched off to avoid electric shock.
- Open the rear hatch to access the screws or clips holding the tail light assembly in place.
- Carefully remove these fasteners and gently pull the tail light assembly out from the body of the vehicle.
- Disconnect the electrical connector from the back of the tail light. It's often a simple plug that can be pulled out after pressing a small tab or lever.
- Replace the old bulb with a new one. Make sure you're using the correct type of bulb as specified in your vehicle's manual.
- Reconnect the electrical connector to the new tail light assembly. Ensure it's securely plugged in.
- Align the tail light assembly with the slots or holes in the car's body and secure it using the appropriate screws or clips you removed earlier.
- Test the new tail light to make sure it's functioning correctly by activating your vehicle's lights.
It's always a good practice to replace tail light bulbs in pairs, even if only one has burnt out. This ensures uniform light output and appearance. In addition, keep a few spare bulbs in your vehicle so you're prepared for emergencies.
While tail lights may not require frequent replacement, regular maintenance will extend their life and keep you safer on the roads. Whether you're travelling through bustling city streets or exploring rugged terrains, maintaining functional tail lights on your Suzuki Jimny enhances both your safety and that of other road users.