Parts for your 1997 Nissan Primera-Wheel hubs

1997 Nissan Primera Wheel Hubs

Based on technical references – including the Nissan Primera P11 Electronic Service Manual (ESM), the Nissan FAST parts catalogue, the Haynes Primera 1990–1999 manual, and common aftermarket listings from bearing specialists – the 1997 Nissan Primera (P11) absolutely uses wheel hubs. The front end runs a hub with a pressed-in bearing in the steering knuckle, and rear variants are supplied either as a hub-and-bearing assembly or a serviceable bearing with a separate hub, depending on market and brake setup. So yes, wheel hubs are very much relevant on this model.

On a 1997 Nissan Primera, the wheel hub’s job is to provide the solid mounting face for the wheel, keep the brake disc centred, and house the wheel bearing so the wheel rotates smoothly. On ABS-equipped cars, the hub/bearing also interfaces with a tone ring or encoder that the ABS sensor reads. When the hub or its bearing starts to wear, owners tend to notice a droning or humming that rises with speed, a vague or wandering steering feel, or even an ABS light if the encoder surface is damaged.

There’s no set replacement interval