Your Selected Vehicle
Parts for your 1997 Mitsubishi Pajero-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector 3 Lamp Combination Black Chrome - MAXILAMPC3XRW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
1997 Mitsubishi Pajero Tail-Lights Maintenance and Replacement Tips
The tail-lights on your 1997 Mitsubishi Pajero are not just essential for keeping you visible and safe on the road, they also play a key role in the overall look of your vehicle. Ensuring that these lights are in optimal condition is vital for both functional and aesthetic reasons. Regular maintenance can prevent potential issues and save you from unnecessary hassle and fines.
Understanding the different situations that could necessitate tail-light replacement or repair is crucial. Here are some general guidelines:
- Routine Checks: It's advisable to inspect your tail-lights every few months. During these checks, ensure that the lights illuminate fully and without flickering. Enlist a friend or use a reflective surface to verify their brightness and consistency.
- Addressing Burnt Bulbs: If you notice that one or both of your tail-lights have gone out, it's time to replace them. The tail-lights on the Pajero typically require a simple bulb replacement. Make sure to consult your owner's manual or an auto parts professional for the correct bulb type.
- Dealing with Foggy or Cracked Lenses: Over time, the lens covering your tail-lights may become cloudy or cracked. This can reduce the tail-lights' effectiveness and should be addressed promptly. Gentle cleaning with a specialised plastic cleaner can often improve clarity. For cracked lenses, replacement might be necessary to ensure they remain watertight and functional.
Replacing the bulbs is a straightforward process on the 1997 Mitsubishi Pajero, usually requiring just a screwdriver and a bit of patience. Begin by accessing the tail-light assembly from the boot of the vehicle. Remove any screws holding the assembly in place, then gently pull it free enough to access the bulbs. Twist the bulb holder counterclockwise to release the old bulb. Insert the new bulb into the holder and reassemble everything in reverse order. Always test the lights before considering the job done.
If new bulbs do not fix the issue, you might need to examine the wiring for any signs of wear or damage. Indicators of wiring issues could include flickering lights or bulbs that fail shortly after being replaced. In such cases, consulting a professional may be the best course of action to avoid further complications.
Regular maintenance of your tail-lights should be regarded as an integral component of vehicle upkeep. By addressing issues promptly and ensuring everything is in working order, you contribute to safer driving conditions for yourself and others. It's a small task that has a big impact on your driving safety and peace of mind. Keep your trusty Pajero in top condition by ensuring every part, including the tail-lights, is working as it should.