Your Selected Vehicle
Parts for your 1997 Mitsubishi Lancer-Headlights
LED Autolamps 12V Interior Strip lamp Touch Sensor Switch With MCU Circuitry - 40260SMCU
Fitment Notes:
Explore 4WD & Adventure
OEX Battery Master / Isolation Switch Off/On SPST (Contacts Rated 200A @ 12V) - ACX3410
Fitment Notes:
LED Autolamps 10/30V Amber Emergency Light Bar Clear Lens With Amber LEDs 10 Selectable Flash Patterns - LB1345ACM
Fitment Notes:
LED Autolamps 10/30V Amber Emergency Bar Clear Lens With Amber LEDs 19 Selectable Flash Patterns - LB964ACM
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
Fitment Notes:
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
Drivetech 4x4 Rocker 4 Switch Panel On - Off - SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11030
Fitment Notes:
OEX 2.5mm 5 Core Trailer Cable, With Black Sheath - 30m Roll (NZ Ref.205) - ACX0820
Fitment Notes:
OEX 4mm Twin Core Automotive Cable, Figure 8, Red With Black Trace - 30m Roll (NZ Ref.153) - ACX0804
Fitment Notes:
Replacing and Maintaining Headlights on Your 1997 Mitsubishi Lancer
Headlights are a crucial component of any vehicle, providing visibility during night driving and adverse weather conditions. For a 1997 Mitsubishi Lancer, ensuring that the headlights are in top condition is vital for safe driving. Here's a guide on replacing and maintaining the headlights of your Lancer to keep them functioning optimally.
Before diving into the replacement process, it's essential to know the type of headlight bulb your 1997 Mitsubishi Lancer uses. Most Lancers from this era typically use halogen bulbs, which are cost-effective and provide good illumination. Always double-check with a reliable auto parts source or your user manual to confirm the right bulb type.
Visit an automotive store or online parts retail where you can easily find the correct replacement bulbs. Keep in mind that while it's tempting to upgrade to brighter or LED bulbs, you must ensure that whatever you choose is compatible with your vehicle's electrical system and legal for road use.
When it's time for replacement, you'll need some basic tools on hand: a screwdriver and possibly some gloves to handle the bulbs. Here are the steps:
- Switch off your vehicle and allow the headlights to cool down if they've been in use.
- Open the bonnet and locate the back of the headlight assembly. This is where you will find the bulb connectors.
- Unplug the electrical connector from the back of the headlight bulb. You might need to gently wiggle it free.
- If there's a metal clip or a plastic cover, remove it to access the bulb. This part can vary slightly depending on the assembly.
- Carefully remove the old bulb. If it's a halogen bulb, handle it carefully to avoid breaking it.
- Replace it with the new bulb. Avoid touching the glass of the new bulb with your fingers as oil from your skin can create 'hot spots' that may cause it to fail prematurely. Use gloves or a clean paper towel if necessary.
- Secure the new bulb in place, reattach any clips or covers, and plug the electrical connector back in.
- Test your new headlights by turning on your vehicle's lighting system before closing the bonnet.
Maintaining your headlights goes beyond just replacing the bulbs. Regularly cleaning the light covers can make a significant difference. Over time, dirt, grime, and oxidation can cloud up the headlight casing, reducing the effectiveness of even the best bulbs. Using a headlight restoration kit every few months can keep your headlights clear and shining bright.
If you ever find that your headlights are dimming repeatedly or there's moisture inside, it might be worth checking for leaks or issues with the electrical system. In such cases, consulting with a professional mechanic for a full check-up is a smart move.
Keeping your 1997 Mitsubishi Lancer's headlights in good shape will not only improve your driving experience but also ensure your safety on the road. Regular checks and maintenance go a long way in ensuring that this vital component of your car functions correctly, whatever the driving conditions.