Your Selected Vehicle
Parts for your 1997 Daihatsu Terios-Tail lights
LED Autolamps 12V LED Boat Trailer Lamps Stop/Tail/Indicator with Licence Plate Lamp Light Left & Right Side, with 8m cable, Twin Blister - 209GARLP2/8M
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V LED Stop/Tail/Indicator/Licence LED Light With 4 Pin Plug - 99ARLM4P
Fitment Notes:
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
Fitment Notes:
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator/Reverse LED Light Blister Pack - 280ARWM
Fitment Notes:
LED Autolamps 12/24V LED MaxiLamp Stop/Tail/Indicator/Reflector Light Round Blister Pack - MAXILAMP1XC
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reflector Light 28cm Cable Blister Pack - 275MAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Ind/Rev LED Light Kit 450mm Loom DT04 Connector - SO282ARWM2LR450
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator Light Clear Lens Coloured LEDs Surface Mount - 12ARM-2
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Assembly Light With Black Bracket - 80BAR
Fitment Notes:
Maintaining and Replacing Tail-Lights on Your 1997 Daihatsu Terios
When it comes to ensuring your 1997 Daihatsu Terios stays both safe and stylish on the road, keeping an eye on the tail-lights is a crucial part of regular maintenance. Tail-lights play an essential role in not only illuminating your vehicle from the rear but also in conveying signals to other drivers when you brake or make turns. Given their importance, maintaining and replacing them when necessary is a key responsibility.
Start by routinely checking your tail-lights to ensure they're working properly. A quick walk-around your vehicle with someone operating the lights lets you spot any bulbs that have burnt out. Check for cracks or cloudiness in the lens which can drastically reduce the effectiveness of your lights.
- Replacement of Bulbs: If a bulb is burnt out, replacing it isn't too challenging. First, check your owner's manual for the appropriate bulb type. Typically, you'll need to access the tail-light assembly from the inside of the boot. This might involve removing a cover or panel to reach the bulbs. Carefully twist the bulb socket out of the assembly, replace the bulb, then reinstall the socket and any panel you might have removed.
- Lens and Housing Inspection: Over time, the tail-light lens could become cloudy or cracked. Cloudiness can often be polished out using specialized kits available at most automotive stores. If the lens is cracked, it's best to replace the entire assembly to prevent moisture from getting into intricate electrical components which can cause more severe damage.
- Wiring and Socket Checks: In some cases, the light might not be working due to issues with the wiring or socket. Check for any visible signs of wear such as fraying wires or corrosion on the socket. Cleaning the contacts with a bit of electrical cleaner can sometimes fix the issue. If not, professional assistance might be necessary.
In terms of maintaining the longevity and performance of your tail-lights, regular cleaning, especially during winter or after long drives in dusty conditions, helps keep them bright. Also, consider driving with your lights on during poor weather conditions to increase visibility.
Remember that properly functioning tail-lights ensure you're compliant with road safety regulations and help keep everyone safe. While a bit of elbow grease might be all that's needed to keep them shining, don't hesitate to consult a professional if you're unsure or the problem seems more complex. The peace of mind in ensuring your 1997 Daihatsu Terios is both visible and safe on the road is certainly worth it.