Your Selected Vehicle
Parts for your 1996 Ford Falcon-Headlight bulbs
Explore 4WD & Adventure
Cole Hersee Rocker Switch On/Off SPST 24V Red Illuminated (Contacts Rated 25A @ 24V) - 58328-58BL
Fitment Notes:
Narva 4 Position Ignition Switch Suits International Trucks (Contacts Rated 5A @ 12V) - 64026
Fitment Notes:
OEX 3mm Twin Core Automotive Cable, Figure 8, White with Red Trace - 30m Roll (NZ Ref. 151) - ACX0833
Fitment Notes:
Narva Push Button Starter Switch On/Off Momentary SPST Green LED (Contacts Rated 50A @ 12V) - 60098BL
Fitment Notes:
Narva Rotary Battery Master Switch With Removeable Keyed Knob 300A (Contacts Rated 300A @ 12V) - 61045BL
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,525mm, Stud Hole - 10mm - ACX1017
Fitment Notes:
Narva Crimp Terminal Ring Brass Terminal Entry 6.3mm Non Insulated 100 Pce - 56236
Fitment Notes:
Narva Crimp Terminal Ring Blue Terminal Entry 6.3mm Heat Shrinkable 50 Pce - 56366
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1297L
Fitment Notes:
Narva Sealed Rocker Switch Off/On SPST 12V Green Illuminated (Contacts Rated 20A @ 12V) - 63124BL
Fitment Notes:
Maintaining Your 1996 Ford Falcon's Headlight Bulbs
Ensuring that your 1996 Ford Falcon's headlights are in tip-top condition is vital for both safety and performance. Whether you're cruising down the motorway or navigating through urban streets, having optimal visibility is non-negotiable. If you're in the market for headlight bulbs, or just looking to maintain the brightness of your current set, here are a few guidelines for keeping those beams as bright as possible.
For Falcons from 1996, the typical headlight bulb type used is often the H4 halogen bulb. It's a staple in many vehicles from that era due to its performance and reliability. If you're considering changing or upgrading your headlight bulbs, it's vital to stick with the correct bulb type. Using an incompatible bulb can result in poor lighting performance or even cause damage to the vehicle's lighting system.
- Regular Inspection: Make it a habit to regularly inspect your headlights. Look for any signs of discoloration, dimming, or flickering. These can be early indicators that your bulb is nearing the end of its life or that it may need cleaning or adjustment.
- Replacing Bulbs: When it's time to change them, ensure you replace both headlight bulbs at the same time. It's a good practice since pairs of headlights generally age together. This way, you maintain even brightness and avoid uneven lighting which can be distracting and unsafe.
- Handling with Care: When replacing halogen bulbs, always handle them with care. Use a clean cloth or gloves to avoid touching the glass directly. Oils from your skin can create hot spots on the bulb, causing them to burn out faster.
- Aligning Properly: After installation, check that the beam alignment is correct. Misaligned headlights can reduce your visibility and may dazzle other drivers, putting everyone at risk. There are straightforward DIY kits available if you wish to adjust them yourself, or many garages can provide this service during regular maintenance checks.
Remember, headlight performance can also be impacted by the condition of the lens. Over time, your lenses might become cloudy or discoloured due to exposure to the elements. Consider using a headlight restoration kit to polish the lenses and improve clarity. This simple task can make a world of difference to your vehicle's appearance and your nighttime visibility.
Whether it's for routine maintenance or an unexpected quick fix, give your 1996 Ford Falcon's headlights the attention they need. At the end of the day, it's all about ensuring you drive safely with a clear view of the road ahead.