Your Selected Vehicle
Parts for your 1996 Ford Falcon-Headlight bulbs
OEX Crimp Terminal 2-way Male/Female Blue Terminal Entry 6.3 x 0.8mm Vinyl 10 Pce - ACX3012BL
Fitment Notes:
Hella Toggle Switch On/Off/On Spdt 12V Green Illuminated (Contacts Rated 15A @ 12V) - 4206
Fitment Notes:
Narva Automotive/Marine Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61044BL
Fitment Notes:
Explore 4WD & Adventure
Narva Sealed Rocker Switch Off/On SPST 12V Blue Illuminated (Contacts Rated 20A @ 12V) - 63123BL
Fitment Notes:
Drivetech 4x4 Rocker AUX Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11013
Fitment Notes:
OEX Rocker Switch Mom On/Off Momentary On SPDT (Contacts Rated 16A @ 12 Or 24V) - ACX3716BL
Fitment Notes:
Narva 4 Position Rotary Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61084BL
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
OEX 4mm Single Core Automotive Cable, Red With Black Trace - 30 Roll (NZ Ref.152) - ACX0735
Fitment Notes:
Maintaining Your 1996 Ford Falcon's Headlight Bulbs
Ensuring that your 1996 Ford Falcon's headlights are in tip-top condition is vital for both safety and performance. Whether you're cruising down the motorway or navigating through urban streets, having optimal visibility is non-negotiable. If you're in the market for headlight bulbs, or just looking to maintain the brightness of your current set, here are a few guidelines for keeping those beams as bright as possible.
For Falcons from 1996, the typical headlight bulb type used is often the H4 halogen bulb. It's a staple in many vehicles from that era due to its performance and reliability. If you're considering changing or upgrading your headlight bulbs, it's vital to stick with the correct bulb type. Using an incompatible bulb can result in poor lighting performance or even cause damage to the vehicle's lighting system.
- Regular Inspection: Make it a habit to regularly inspect your headlights. Look for any signs of discoloration, dimming, or flickering. These can be early indicators that your bulb is nearing the end of its life or that it may need cleaning or adjustment.
- Replacing Bulbs: When it's time to change them, ensure you replace both headlight bulbs at the same time. It's a good practice since pairs of headlights generally age together. This way, you maintain even brightness and avoid uneven lighting which can be distracting and unsafe.
- Handling with Care: When replacing halogen bulbs, always handle them with care. Use a clean cloth or gloves to avoid touching the glass directly. Oils from your skin can create hot spots on the bulb, causing them to burn out faster.
- Aligning Properly: After installation, check that the beam alignment is correct. Misaligned headlights can reduce your visibility and may dazzle other drivers, putting everyone at risk. There are straightforward DIY kits available if you wish to adjust them yourself, or many garages can provide this service during regular maintenance checks.
Remember, headlight performance can also be impacted by the condition of the lens. Over time, your lenses might become cloudy or discoloured due to exposure to the elements. Consider using a headlight restoration kit to polish the lenses and improve clarity. This simple task can make a world of difference to your vehicle's appearance and your nighttime visibility.
Whether it's for routine maintenance or an unexpected quick fix, give your 1996 Ford Falcon's headlights the attention they need. At the end of the day, it's all about ensuring you drive safely with a clear view of the road ahead.