Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 1996 Daihatsu Gran move-Coolant

Sort by
T&E Tools Coolant Evacuator and System Tester

T&E Tools Coolant Evacuator and System Tester

$278
Fitment Notes:
See More
Repco 12 Pc Coolant Funnel Set - RST241

Repco 12 Pc Coolant Funnel Set - RST241

$149
Fitment Notes:
See More
Toledo Coolant Filler Funnel Set - 305092

Toledo Coolant Filler Funnel Set - 305092

$224
Fitment Notes:
See More
Repco Radiator Cooling System Kit - RTT1019

Repco Radiator Cooling System Kit - RTT1019

$906
Fitment Notes:
See More
Repco Oil Extractor 6L - ROE6L

Repco Oil Extractor 6L - ROE6L

$253
Fitment Notes:
See More
Gates Hose Cutter up to 3in ID - 91143

Gates Hose Cutter up to 3in ID - 91143

$213
Fitment Notes:
See More
Toledo Thermometer 0-220 Deg Farenheit - 308002

Toledo Thermometer 0-220 Deg Farenheit - 308002

$36
Fitment Notes:
See More

Explore 4WD & Adventure

Showing 1 - 7 of 7 products

Coolant Maintenance for the 1996 Daihatsu Gran Move

When it comes to the maintenance of your 1996 Daihatsu Gran Move, paying attention to the coolant system is crucial. The coolant is essential in keeping your engine running smoothly by managing its temperature, preventing it from overheating, and protecting it from corrosion. Regular checking and maintenance of the coolant can prevent unnecessary damage and keep your engine performing optimally.

Replacing the coolant in your Daihatsu Gran Move should be part of your routine servicing schedule. It's advisable to replace the coolant every two to three years, or every 40,000 to 60,000 kilometres, depending on the type of coolant used and the specific conditions you drive under. Here are some steps and tips for coolant maintenance:

  1. Check Coolant Levels: Regularly inspect your coolant level to ensure that it is sufficient. The coolant reservoir is usually a transparent container with level markings, making it easy to monitor. If the level is below the recommended mark, a top-up is necessary.
  2. Inspect Coolant Colour and Condition: Over time, coolant can become contaminated and lose its effectiveness. Fresh coolant typically has a bright colour, like green, yellow, red or blue, depending on the type. If it appears brownish or if there are rust particles, it's time for a replacement.
  3. Coolant Flush: For a complete coolant change, it's essential to perform a system flush. This involves draining the old coolant entirely, flushing the system with water or a dedicated flushing agent to remove any residue or contaminants, and then refilling with new coolant. Ensure that you use the correct type of coolant that is suitable for your Gran Move, as recommended in the owner's manual.
  4. Regular Inspections: As part of regular maintenance, inspect hoses and clamps for signs of wear or corrosion. Any leaks or cracks should be addressed immediately to avoid engine overheating or coolant loss.
  5. Use Proper Mixing Ratios: Pay attention to the coolant-to-water ratio when refilling your system. A common ratio is 50:50, especially in moderate climates, but it's best to verify the recommendations specific to your vehicle.

It's always a good idea to consult your Daihatsu's manual for specific guidance regarding the type of coolant suitable for the Gran Move. Additionally, professional advice from a mechanic can help ensure the system remains in top shape. By keeping on top of coolant maintenance, you're not only extending the life of your engine but also ensuring a smoother and safer driving experience. Doing so will save time and money in the long run by preventing more serious engine issues.