Your Selected Vehicle
Parts for your 1995 Toyota Hilux surf-Headlight bulbs
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Explore 4WD & Adventure
LED Autolamps 174 Series Reverse Lamp 12/24V, Surface Mount, 40cm Cable - 174WMB
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps 12V Stop/Tail Lamp Black Chrome Round With Clear Lens - 102RBC
LED Autolamps 10/30V LED Side Direction Indicator Light With 30cm Wire - 35AMB
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
LED Autolamps Licence Plate Lamp Black Bracket Multi Volt With 1m Cable - 35BLM1P
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack - 12WM-2
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
1995 Toyota Hilux Surf headlight bulbs
Headlight bulbs are very much used on the 1995 Toyota Hilux Surf. Toyota’s service literature and parts catalogues back this up: the Toyota Repair Manual for Hilux Surf/4Runner (RM184E, N130 series) and the Toyota Electronic Parts Catalog list replaceable halogen bulbs for this model year. For 1995 builds on the N130 chassis (up to around July ’95), the headlamps typically take H4 60/55 W dual‑filament bulbs. For late‑1995 third‑generation Surf (185 series), Toyota specifies separate bulbs: HB4/9006 for low beam and HB3/9005 for high beam. The owner’s handbook for the respective chassis confirms these fitments and wattages.
On this Surf, the headlight bulbs do the heavy lifting for safe night driving, punching a clear, legal beam pattern down the road and keeping oncoming traffic happy with a crisp low‑beam cutoff. Halogen bulbs are affordable, easy to source, and designed to work perfectly with the factory reflectors and lenses, so light colour and spread stay compliant with local regs.
As part of regular servicing, it pays to show the headlight bulbs a bit of love:
- Replace in pairs to keep brightness and colour even across both sides.
- Stick to the factory wattage (H4 60/55 W or HB3/HB4 as specified) to avoid melted connectors or reflector damage.
- Handle new bulbs by the base only—oily fingerprints shorten bulb life.
- Check for dull, yellowed, or crazed lenses, a quick polish can restore output.
- Confirm beam aim after any replacement or front‑end work.
- Inspect plugs for heat discolouration and fix any voltage drop or poor earths.
DIY bulb replacement is straightforward on the Hilux Surf. Access the rear of the headlamp, unplug the connector, peel back the rubber boot (if fitted), unclip the spring, and withdraw the bulb. Align the new bulb’s locating tabs carefully, refit the spring and boot, then reconnect. If the vehicle is a late‑1995 185 series with separate high/low bulbs, repeat for each holder. With fresh halogens fitted, the Surf’s lights will feel brighter, whiter, and far more confidence‑inspiring on those long Aussie and Kiwi night drives.
Popular questions
What bulb type fits a 1995 Hilux Surf?
Early 1995 N130 models generally use an H4 60/55 W dual‑filament bulb for both high and low beam in each headlamp. Late‑1995 185 series models typically use HB4/9006 for low beam and HB3/9005 for high beam. Checking the build plate and lamp back cover markings (or the Toyota EPC) will confirm which you’ve got.
Can I upgrade to LED bulbs?
Many LED retrofits physically fit, but legality and beam quality vary. Because the Surf’s reflectors were engineered for halogen filaments, some LEDs can scatter light or dazzle. If considering LEDs, choose ADR/UNECE‑compliant units matched to your housing and verify local rules in Australia or New Zealand before fitting.
How often should the bulbs be replaced?
Halogen bulbs tend to dim before they die, so many owners refresh them every 2–3 years or when output looks tired. Replace both sides together, check aim, and inspect connectors and lenses during the same service.